The Domain Name System (DNS) is a hierarchical naming system for computers, services, or any resource participating in the Internet. On this router the user
can either let the WAN interface automatically configure the DNS settings or the user can manually setup the DNS configuration.
DNS Server Configuration
Select the configured WAN interface for DNS server information OR enter
the static DNS server IP Addresses for single PVC with IPoA, static IPoE
protocol.
Page 67 / 128
D-Link DSL-2760U USER’S MANUAL
67
Dynamic DNS Configuration
The Dynamic DNS service allows you to alias a dynamic IP address to a static hostname in any of the many domains, allowing your DSL router to be more easily
accessed from various locations on the Internet.
Dynamic DNS Configuration
Choose Add or Remove to configure Dynamic DNS.
Adding a Rule
This page allows you to add a Dynamic DNS address from DynDNS.org,
TZO, or dlinkddns.com.
Page 68 / 128
D-Link DSL-2760U USER’S MANUAL
68
Viewing
After add the rule you can view it here.
Page 69 / 128
D-Link DSL-2760U USER’S MANUAL
69
DSL Settings
On the DSL Settings page the user can configure the DSL modulation settings, phone line pairing, test modes and even the tone selection.
Modulation, Phone line pairing and Capability
Choose the appropriate modulation type needed for the DSL connection
here.
Choose the phone line pair to be used here.
Choose the appropriate capability used here.
Click
Apply/Save
to save and activate the change.
To change some of the advanced settings, click the
Advanced Settings
button.
Page 70 / 128
D-Link DSL-2760U USER’S MANUAL
70
Advanced Settings
Here the user can choose which test mode the router must use.
19216811.live