TR069 management allows the remote configuration to the Router.
Click the
Enable
radio button in
Inform
and configure the TR069
management access information.
Click the
Apply
button when you are satisfied that all the settings are
configured correctly.
Page 102 / 128
D-Link DSL-2760U USER’S MANUAL
102
Internet Time
This page allows you to the modem's time configuration.
Time Settings
On this page the user can choose to automatically settings time
synchronization to a host of available time server globally.
The user can also specify the time zone offset.
Click
Apply/Save
to configure the internet time options.
Page 103 / 128
D-Link DSL-2760U USER’S MANUAL
103
Access Control
Passwords
Access to your DSL router is controlled through three user accounts: admin,
support, and user.
The user name "admin" has unrestricted access to change and view
configuration of your DSL Router.
The user name "support" is used to allow an ISP technician to access your
DSL Router for maintenance and to run diagnostics.
The user name "user" can access the DSL Router, view configuration
settings and statistics, as well as, update the router's software.
The user can use the fields to enter up to 16 characters and click
Apply/Save
to change or create passwords.
NOTE:
Password cannot contain a space.
Services
This page allows to configure the Service Control. Tick the corresponding
Enable
check boxes to enable the services on LAN or WAN. Click
Apply/Save
to save the settings.
Page 104 / 128
D-Link DSL-2760U USER’S MANUAL
104
IP Address
Tick the
Enable Access Control Mode
check box to allow the IP addresses
listed in the table below to access the local management.
Enter the IP Address in the field and click the
Apply
button to see the IP
address displays in the table below.
Tick the corresponding check box in the table and click the
Remove
button
to delete the IP address.
Click the
Apply
button to take effect.
Update Software
On this page the user can update the firmware of the router by simply download the latest firmware file and uploading it through this page. It’s important to keep
the router up to date with the latest firmware to prevent future problems.
Obtain an updated software image file from your ISP. Enter the path to the
image file location in the box below, or click the
Browse
button to locate the
image file. Click the
Update Software
button once to upload the new image
file.
NOTE:
The update process takes about 2 minutes to complete, and your
DSL Router will reboot.
Page 105 / 128
D-Link DSL-2760U USER’S MANUAL
105
Reboot
On this page the user can manually reboot or restart the router.
To reboot the router click the
Reboot
button.
The DSL router will take 2 minutes to complete the reboot process.
19216811.live