1. Enter the Group name and the group name must be unique and select
either 2. (dynamic) or 3. (static) below:
2. If you like to automatically add LAN clients to a WAN Interface in the new
group add the DHCP vendor ID string. By configuring a DHCP vendor ID
string any DHCP client request with the specified vendor ID (DHCP option
60) will be denied an IP address from the local DHCP server.
3. Select interfaces from the available interface list and add it to the grouped
interface list using the arrow buttons to create the required mapping of the
ports. Note that these clients may obtain public IP addresses
4. Click the
Apply/Save
button to make the changes effective immediately
IMPORTANT:
If a vendor ID is configured for a specific client device please
REBOOT the client device attached to the modem to allow it to obtain an
appropriate IP address.
Page 77 / 128
D-Link DSL-2760U USER’S MANUAL
77
LAN Ports Configuration
Use this page to enable/disable the Virtual LAN Ports feature.
LAN Ports Configuration
Tick the ENET (1-4) option to include ports 1-4 to the Virtual LAN ports
feature.
Click
Apply/Save
to save and activate the change.
Page 78 / 128
D-Link DSL-2760U USER’S MANUAL
78
Wireless
Wireless communication is to transfer data from point A to point B without the need for physical cabling.
Page 79 / 128
D-Link DSL-2760U USER’S MANUAL
79
Basic Wireless Configuration
This page allows you to configure basic features of the wireless LAN interface.
Basic Configuration
You can enable or disable the wireless LAN interface, hide the network from
active scans, set the wireless network name (also known as SSID) and
restrict the channel set based on country requirements.
Click
Apply/Save
to configure the basic wireless options.
Page 80 / 128
D-Link DSL-2760U USER’S MANUAL
80
Security
This page allows you to configure security features of the wireless LAN interface. You may setup configuration manually or through Wi-Fi Protected Setup (WPS).
The Windows Security Center (WSC) or Action Center is a component included with Microsoft's Windows XP (beginning with Service Pack 2), Windows Vista
and Windows 7 operating systems that provides users with the ability to view the status of computer security settings and services.
Wireless Security
You can set the network authentication method manually, selecting data
encryption, specifying whether a network key is required to authenticate to
this wireless network and specify the encryption strength.
19216811.live