D-Link DSL-2760U USER’S MANUAL

56

IP Filtering – Outgoing

The new rule is added.

IP Filtering – Incoming

The new rule is added.

D-Link DSL-2760U USER’S MANUAL

57

Security – Mac Filtering

MAC Filtering is only effective on ATM PVCs configured in Bridge mode.

FORWARDED means that all MAC layer frames will be FORWARDED except those matching with any of the specified rules in the following table.

BLOCKED means that all MAC layer frames will be BLOCKED except those matching with any of the specified rules in the following table.

WARNING: Changing from one policy to another of an interface will cause all defined rules for that interface to be REMOVED AUTOMATICALLY! You will need to

create new rules for the new policy.

MAC Filtering Policy For Each Interface:

To change the Policy simply tick the

Change

check box and click the

Change Policy

button.

Choose

Add

or

Remove

to configure MAC filtering rules.

D-Link DSL-2760U USER’S MANUAL

58

Create a filter to identify the MAC layer frames by specifying at least one

condition below. If multiple conditions are specified, all of them take effect.

Click

Save/Apply

to save and activate the filter.

View the newly added rule.

D-Link DSL-2760U USER’S MANUAL

59

Parental Control – Time Restriction

Another powerful security feature is by simply making the router inactive or inaccessible at certain times. This page allows the user to setup a time schedule to

block a specific Mac address.

Use this window to deny access to specified MAC address.

If you are setting up the MAC address blocking, click the

Add

button.

MAC address is a specially formatted text string (xx:xx:xx:xx:xx:xx) that

uniquely identification of a device. This section will allow users to block

devices with certain MAC addresses on the LAN.

To configure for MAC address blocking, enter the username into the

Username field, click

Browser’s MAC Address

to have MAC address of the

LAN device, or click

Other MAC Address

and enter a MAC address

manually. Tick the checkboxes for the desired individual days of the week

and enter desired Start Blocking Time and End Blocking Time.

Click the

Apply/Save

button to save the configuration

An added rule will look like this.

D-Link DSL-2760U USER’S MANUAL

60

Parental Control – URL Filter

Another powerful security measure that this router provides is the blocking or allowing of certain URL addresses. This page allows the user to configure URL

filtering.

Use this window to allow or deny access to a specified URL address.

If you are setting up the URL filtering, click the

Add

button.

To configure URL Filtering, enter a URL in the

URL address

space and also

specify the

port number

. By default a website’s port used is port number

80.

Click

Apply/Save

to continue.

The new rule is added.