Page 41 / 103
Scroll up to view Page 36 - 40
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
41
WAN Service Configuration –PPPoA
Default gateway interface list can have multiple WAN interfaces served as
system default gateways but only one will be used according to the priority
with the first being the higest and the last one the lowest priority if the
WAN interface is connected. Priority order can be changed by removing
all and adding them back in again.
Click the
Next
button to continue.
WAN Service Configuration – PPPoA
Select DNS Server Interface from available WAN interfaces OR enter
static DNS server IP addresses for the system. In ATM mode, if only a
single PVC with IPoA or static IPoE protocol is configured, Static DNS
server IP addresses must be entered.
DNS Server Interfaces can have multiple WAN interfaces served as
system dns servers but only one will be used according to the priority with
the first being the higest and the last one the lowest priority if the WAN
interface is connected. Priority order can be changed by removing all and
adding them back in again. Click the
Next
button to continue
Page 42 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
42
WAN Service Configuration – PPPoA
This summary window allows you to confirm the settings you have just
made. Click the
Apply
/ Save
button to save your new PPP over ATM
settings and restart the Router.
Page 43 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
43
WAN Service Configuration – IPoA
This window allows you to enter service description. Click the
Next
button
to continue.
WAN Service Configuration – IPoA
This window allows you to configure the WAN IP settings. This information
is obtained from your ISP. Click the
Next
button to continue.
WAN Service Configuration – IPoA
This window allows you to enable or disable Network Address Translation
and a firewall for your Router. In addition, you can enable or disable IGMP
multicasting. Click the
Next
button to continue.
Page 44 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
44
WAN Service Configuration – IPoA
Default gateway interface list can have multiple WAN interfaces served as
system default gateways but only one will be used according to the priority
with the first being the higest and the last one the lowest priority if the
WAN interface is connected. Priority order can be changed by removing
all and adding them back in again. Click the
Next
button to continue.
WAN Service Configuration – IPoA
S
elect DNS Server Interface from available WAN interfaces OR enter
static DNS server IP addresses for the system. In ATM mode, if only a
single PVC with IPoA or static IPoE protocol is configured, Static DNS
server IP addresses must be entered.
DNS Server Interfaces can have multiple WAN interfaces served as
system dns servers but only one will be used according to the priority with
the first being the higest and the last one the lowest priority if the WAN
interface is connected. Priority order can be changed by removing all and
adding them back in again. Click the
Next
button to continue
Page 45 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
45
WAN Service Configuration – IPoA
This summary window allows you to confirm the settings you have just
made. Click the
Save/Reboot
button to save your new IP over ATM
settings and restart the Router.
19216811.live