Page 26 / 103
Scroll up to view Page 21 - 25
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
26
Advanced Setup
This chapter include the more advanced features used for network management and security as well as administrative tools to manage the Router,
view status and other information used to examine performance and for troubleshooting.
Layer2 Interface
To access the
DSL ATM Interface Configuration
window, click the
ATM Interface
button in the
Layer2 Interface
directory.
This window is used to configure the
ATM interface. You can add and
delete ATM interface on this window.
If you are setting up the ATM interface for the first time, click the
Add
button.
ATM Interface
Page 27 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
27
The
ATM PVC
Configuration window allows you to set up ATM PVC
configuration. Enter Virtual Path Identifier,and Virtual Channel Identifier.
The VPI and VCI values should be provided by your ISP. This window
also allows you to select DSL Link Type,
PPPoA
、
IpoA and EoA (EoA is
for PPPoE, IPoE, and Bridge)
Use the drop-down menu to select the desired Encapsulation Mode..
Click the
Apply / Save
button to Save.
Page 28 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
28
WAN Service
To access the
Wide Area Network (WAN) Service Setup
window, click the
WAN Service
button in the
Advanced Setup
directory.
This window is used to configure the
WAN interface. You can add and
delete WAN interface on this window.
If you are setting up the WAN interface for the first time, click the
Add
button.
Page 29 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
29
The
WAN Service Interface Configuration
Configuration window allows
select a layer 2 interface for this service.
Click the
Next
button to continue
.
Page 30 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
30
This window allows you to select the appropriate connection type. The
choices include PPP over ATM (PPPoA), PPP over Ethernet (PPPoE), IP
over Ethernet (IpoE), IP over ATM (IPoA), and Bridging.
WAN Service Configuration – PPPoE
Click the PPP over Ethernet (PPPoE) radio button on this window. This
window also allows you to use the drop-down menu to enable IPv6
service. Click the
Next
button to continue.
19216811.live