Page 36 / 103
Scroll up to view Page 31 - 35
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
36
WAN Service Configuration –
IPoE
This window allows you to enable or disable Network Address Translation
and a firewall for your Router. In addition, you can enable or disable IGMP
multicasting. And You can input 2
nd
ip on this page. Click the
Next
button
to continue.
WAN Service Configuration – IPoE
Default gateway interface list can have multiple WAN interfaces served as
system default gateways but only one will be used according to the priority
with the first being the higest and the last one the lowest priority if the
WAN interface is connected. Priority order can be changed by removing
all and adding them back in again. Click the
Next
button to continue
Page 37 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
37
WAN Service Configuration – IPoE
Select DNS Server Interface from available WAN interfaces OR enter
static DNS server IP addresses for the system. In ATM mode, if only a
single PVC with IPoA or static IPoE protocol is configured, Static DNS
server IP addresses must be entered.
DNS Server Interfaces can have multiple WAN interfaces served as
system dns servers but only one will be used according to the priority with
the first being the higest and the last one the lowest priority if the WAN
interface is connected. Priority order can be changed by removing all and
adding them back in again. Click the
Next
button to continue
WAN Service Configuration – IPoE
This summary window allows you to confirm the settings you have just
made. Click the
Apply / Save
button to save your new IP over Ethernet
settings and restart the Router.
Page 38 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
38
WAN Service Configuration – BRIDGING
Click the Bridge radio button on this window. Click the
Next
button to
continue.
Page 39 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
39
WAN Service Configuration – BRIDGING
This summary window allows you to confirm the bridging settings you
have just made. Click the
Apply /Save
button to save your new bridging
settings and restart the Router.
WAN Service Configuration – PPPoA
This window allows you to enter service description. Click the
Next
button
to continue.
Page 40 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
40
WAN Service Configuration – PPPoA
This window allows you to set the username and the password for your
PPP connection. This information is obtained from your ISP. Additional
settings on this window will also depend on your ISP. And You can input
2
nd
ip on this page. Click the
Next
button to continue.
19216811.live