D-Link DSL-2750U-Etisalat Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

D-Link

DSL-2750U-Etisalat

Page 61 / 103 Scroll up to view Page 56 - 60

Appendix A – Troubleshooting

D-Link DSL-2750U User Manual

Enter the static routing information for an entry to the routing table.

Click the

Apply /

Save

button when you are finished.

Policy Routing

Click the

Add

button on the

Policy Routing Settup

window to access the

following window displayed on the next page.

Page 62 / 103

Appendix A – Troubleshooting

D-Link DSL-2750U User Manual

Enter the Policy Routing information.Click the

Apply /

Save

button when

you are finished.

RIP

To activate RIP for the device, select the

Enabled

radio button for Global

RIP Mode. To configure an individual interface, select the desired RIP

version and operation, followed by placing a check in the 'Enabled'

checkbox for the interface. Click the

Save/Apply

button to save the

configuration, and to start or stop RIP based on the Global RIP mode

selected.

Page 63 / 103

Appendix A – Troubleshooting

D-Link DSL-2750U User Manual

DNS

To access the

DNS

windows, click the

DNS

button in the

Advanced Setup

directory. The

DNS

button appears when configuring WAN interface in

PPPoA, PPPoE, MER or IPoA.

DNS Server

Select DNS Server Interface from available WAN interfaces OR enter

static DNS server IP addresses for the system. In ATM mode, if only a

single PVC with IPoA or static IPoE protocol is configured, Static DNS

server IP addresses must be entered.

DNS Server Interfaces can have multiple WAN interfaces served as

system dns servers but only one will be used according to the priority with

the first being the higest and the last one the lowest priority if the WAN

interface is connected. Priority order can be changed by removing all and

adding them back in again. Click the

Apply / Save

button when you are

finished.

Page 64 / 103

Appendix A – Troubleshooting

D-Link DSL-2750U User Manual

Dynamic DNS

The Router supports Dynamic DNS (Dynamic Domain Name Service).

The Dynamic DNS service allows a dynamic public IP address to be

associated with a static host name in any of the many domains, allowing

access to a specified host from various locations on the Internet. This is

enabled to allow remote access to a host by clicking a hyperlinked URL in

the form

hostname.dyndns.org

, Many ISPs assign public IP addresses

using DHCP, this can make it difficult to locate a specific host on the LAN

using standard DNS. If for example you are running a public web server or

VPN server on your LAN, this ensures that the host can be located from

the Internet if the public IP address changes. DDNS requires that an

account be setup with one of the supported DDNS providers.

Click

Add

to see the Add DDNS Settings section.

Enter the required DDNS information, click the

Apply / Save

button to

save the information.

Note

DDNS requires that an account be setup with one of the supported

DDNS servers prior to engaging it on the Router. This function will not

work without an accepted account with a DDNS server.

Page 65 / 103

Appendix A – Troubleshooting

D-Link DSL-2750U User Manual

DSL

To access the

DSL Settings

window, click the

DSL

button in the

Advanced Setup

directory.

This window allows you to select the desired modulation, phone line pair,

and capability. Click the

Apply /

Save

button when you are finished.

Click the

Advanced Settings

button to select a DSL test mode.

Note:

Modulation ADSL2

、

ADSL2+ and AnnexL should be selected

simultaneously

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share