Page 71 / 103
Scroll up to view Page 66 - 70
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
71
This window allows you to advanced settings.
Page 72 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
72
Multicast
To access the
IGMP Configuration
window, click the
Multicast
button in the
Advanced Setup
directory.
Enter IGMP protocol configuration fields if you want modify default
values shown below
.
Page 73 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
73
Wireless
Press
Wireless
in the left menu to enter wireless section. You can select to configure wireless setup, security and management.
Basic
This page allows you to configure basic features of the wireless LAN
interface. You can enable or disable the wireless LAN interface, hide the
network from active scans, set the wireless network name (also known as
SSID) and restrict the channel set based on country requirements.
Click "
Apply/Save
" to configure the basic wireless options.
Page 74 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
74
Security
This page allows you to configure security features of the
wireless LAN interface.
You may setup configuration manually or through WiFi
Protcted Setup(WPS)
You can select to configure WEP encryption, Shared, 802.1x,
WPA, and WPA2 authentication.
Page 75 / 103
Appendix A – Troubleshooting
D-Link DSL-2750U User Manual
75
MAC Filter
This page can help you to allow or deny certain MAC addresses to pass
through or block out.
Click
Add
to see the following page.
Enter MAC Address and click
Apply /
Save
to add the MAC address to
MAC filter.
19216811.live