1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DSL-2750E
    5. /
  5. 7
Page 31 / 103 Scroll up to view Page 26 - 30
DSL-2750E User Manual
28
Field
Description
Enable DHCPv6
Server
Choose to enable or disable DHCPv6 service.
LAN address
config mode
Set the mode address obtaining mode of LAN PCs.
You may choose
Stateless
or
Statefull
.
Start/End Interface
ID
The address pool using DHCPv6 for address
assignment under statefull mode.
DHCPv6 Lease
Time
The address lease time using DHCPv6 for address
assignment under statefull mode.
Enable RADVD
Choose to enable or disable router advertisement
(RADVD) service.
Auto get prefix
from WAN
Use the site prefix obtained at the WAN side as the
prefix to issue.
Static
Manually add a site prefix.
3.2.6
Time and Date
Choose
Setup
>
Time and Date
. The page shown in the following figure
appears.
Page 32 / 103
DSL-2750E User Manual
29
In the
Time and Date
page, you can configure, update, and maintain the correct
time on the internal system clock. You can set the time zone that you are in and
the network time protocol (NTP) server. You can also configure daylight saving to
automatically adjust the time when needed.
Select
Automatically synchronize with Internet time servers
.
Enter the specific time server and select the time zone from the corresponding
drop-down lists.
Select
Automatically adjust clock for daylight saving changes
if necessary.
Set the daylight as you want.
Click
Apply
to save the settings.
3.2.7
Logout
Choose
Setup
>
Logout
. The page shown in the following figure appears. In this
page, you can log out of the configuration page.
3.3 Advanced
This section includes advanced features for network management, security and
administrative tools to manage the device. You can view status and other
information used to examine performance and troubleshoot.
3.3.1
Advanced Wireless
This function is used to modify the standard 802.11g wireless radio settings. It is
suggested not to change the defaults, as incorrect settings may reduce the
performance of your wireless radio. The default settings provide the best wireless
radio performance in most environments.
Choose
ADVANCED
>
Advanced Wireless
. The page shown in the following
figure appears.
Page 33 / 103
DSL-2750E User Manual
30
3.3.1.1
Advanced Settings
Select
Advance Settings.
The page shown in the following figure appears.
Page 34 / 103
DSL-2750E User Manual
31
Page 35 / 103
DSL-2750E User Manual
32
Wireless Network Name (SSID)
: The Wireless Network Name is a unique name
that identifies a network. All devices on a network must share the same wireless
network name in order to communicate on the network. If you decide to change
the wireless network name from the default setting, enter your new wireless
network name in this field.
These settings are only for more technically advanced users who have sufficient
knowledge about wireless LAN. Do not change these settings unless you know
the effect of changes on the device.
Click
Apply
to save the settings.
3.3.1.2
MAC Filtering
Select
MAC Filtering
. The page shown in the following figure appears.
Choose
Enable Access Control Mode
, and then click
Add
to add a MAC
Address as shown in the following figure.
Click
Apply
to finish.
3.3.1.3
Security Settings
Select
Security Settings
. The page shown in the following figure appears.

Rate

4.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top