Page 41 / 103
Scroll up to view Page 36 - 40
DSL-2750E User Manual
38
Choose
ADVANCED
>
DMZ
. The page shown in the following figure appears.
Click
Apply
to save the settings.
3.3.4
SAMBA
SAMBA
enables the workstation in the network to share the USB flash disk
connected to the 2750E.
Choose
ADVANCED
>
SAMBA
. The page shown in the following figure appears.
In this page you can configure the SAMBA.
Page 42 / 103
DSL-2750E User Manual
39
3.3.5
3G Configuration
Choose
ADVANCED
>
3G Configuration
.
（
Ensure your 3G card is connected
the USB interface of 2750E
）
Note:
It will take about 2 minutes for 2750E to connect the 3G network..
3G card without PIN protect
Plug a 3G card without PIN protection, 2750E will detect the inserted 3G card
and try to connect automatically.
Page 43 / 103
DSL-2750E User Manual
40
Figure 4 Main page
3G card with PIN protect
If the inserted 3G card has PIN protect function, the page will be shown as the
following figure appears. You’ll be required to enter a PIN code which provided by
your ISP before connecting to 3G network. Follow the instructions below to
authenticate the pin code.
Page 44 / 103
DSL-2750E User Manual
41
Step1
Click
Pin Manage
, the following page appears.
Step2
Enter the Pin provided by your ISP, then click
Apply
, the following page
appears. This page indicates the pin authentication is complete.
Seconds later, the page will automatically skip to the following page.
Page 45 / 103
DSL-2750E User Manual
42
In this page, you can choose to
keep the Pin protection of the 3G card
Disable the Pin protection of the 3G card.
Change the Pin code.
-
Keep the PIN Protect
Check
Disable PIN protect
, then click
Apply
. The following page will appear.
This page indicates that the PIN protection remains effective.
Seconds later, the page will skip to the following page, the device continues to
connecting 3G network.
If the 3G connection is established, you can see the following page.
19216811.live