Page 11 / 103
Scroll up to view Page 6 - 10
DSL-2750E User Manual
8
Ethernet, DSL, or both. Technical information about the properties of your
Internet connection is provided by your Internet service provider (ISP). For
example, your ISP should inform you whether you are connected to the Internet
using a static or dynamic IP address, or the protocol, such as PPPoA or PPPoE,
that you use to communicate over the Internet.
Click
Setup Wizard
. The page shown in the following figure appears.
There are 5 steps to configure the device. Click
Next
to continue.
Step 1
Set the time and date.
Page 12 / 103
DSL-2750E User Manual
9
Step 2
Configure the Internet connection.
Click
Next
after time and date setting and the following page appears. In this
page, you can set the internet connection.
Page 13 / 103
DSL-2750E User Manual
10
The following table describes the fields in this page.
Field
Description
Country
Select the country you located from the drop-down list.
ISP
Select the ISP you subscribed the internet service
from.
Protocol
Select the protocol you subscribed from your ISP.
Encapsulation
Mode
Select the method of encapsulation provided by your
ISP. You can select
LLC
or
VCMUX
.
PVC Settings
VPI
: The virtual path between two points in an ATM
network. Its valid value is from
0
to
255
.
VCI
: The virtual channel between two points in an ATM
network, ranging from
32
to
65535
(0 to 31 is reserved
for local management of ATM traffic).
Note:
Different protocol requires entering different information. You can fill in
the entries according to what your ISP provides you.
Click
Next
. The page shown in the following page appears.
Page 14 / 103
DSL-2750E User Manual
11
Step 3
Configure the wireless network. Enter the information and click
Next
to
go to the next step.
Step 4
Change or create the password of an account. Click
Next
to go to the
next step.
Page 15 / 103
DSL-2750E User Manual
12
Step 5
Click
Apply
to save the settings.
Note:
In each step of the Wizard page, you can click
Back
to review or
modify the previous settings. Click
Cancel
to exit the wizard page.
3.2.2
Internet Setup
Choose
Setup
>
Internet Setup
. The page shown in the following figure appears.
In this page, you can configure the WAN interface of the device.
19216811.live