Page 36 / 86
Scroll up to view Page 31 - 35
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
36
QUICK SETUP – MER
Click the MAC Encapsulation Routing (MER) radio button on this window.
This window also allows you to use the drop-down menu to select the
desired Encapsulation Mode. Click the
Next
button to continue.
QUICK SETUP – MER
This window allows you to configure the WAN IP settings. This information
is obtained from your ISP. Click the
Next
button to continue.
Page 37 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
37
QUICK SETUP – MER
This window allows you to enable or disable Network Address Translation
and a firewall for your Router. In addition, you can enable or disable IGMP
multicasting and WAN service. Click the
Next
button to continue.
QUICK SETUP – MER
This window allows you to enter an IP address and subnet mask for the
LAN interface. In addition, you can either enable or disable the DHCP
server.
To enable the DHCP server, enter a starting IP address, an ending IP
address, and a subnet mask. You may also choose to change the default
value of the leased time. Click the
Next
button to continue.
Page 38 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
38
QUICK SETUP - MER
This window allows you to configure Wireless settings of the Router. Tick
Enable Wireless
and enter SSID to enable Wireless LAN. Click the
Next
button to continue.
QUICK SETUP – MER
This summary window allows you to confirm the settings you have just
made. Click the
Save/Reboot
button to save your new MAC
Encapsulation Routing settings and restart the Router.
Page 39 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
39
QUICK SETUP – IPoA
Click the IP over ATM (IPoA) radio button on this window. This window
also allows you to use the drop-down menu to select the desired
Encapsulation Mode. Click the
Next
button to continue.
QUICK SETUP – IPoA
This window allows you to configure the WAN IP settings. This information
is obtained from your ISP. Click the
Next
button to continue.
Page 40 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
40
QUICK SETUP – IPoA
This window allows you to enable or disable Network Address Translation
and a firewall for your Router. In addition, you can enable or disable IGMP
multicasting and WAN service. Click the
Next
button to continue.
QUICK SETUP – IPoA
This window allows you to enter an IP address and subnet mask for the
LAN interface. In addition, you can either enable or disable the DHCP
server.
To enable the DHCP server, enter a starting IP address, an ending IP
address, and a subnet mask. You may also choose to change the default
value of the leased time. Click the
Next
button to continue.
19216811.live