Page 31 / 86
Scroll up to view Page 26 - 30
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
31
QUICK SETUP – PPPoA
This summary window allows you to confirm the settings you have just
made. Click the
Save/Reboot
button to save your new PPP over ATM
settings and restart the Router.
Page 32 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
32
QUICK SETUP – PPPoE
Click the PPP over Ethernet (PPPoE) radio button on this window. This
window also allows you to use the drop-down menu to select the desired
Encapsulation Mode. Click the
Next
button to continue.
Page 33 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
33
QUICK SETUP – PPPoE
This window allows you to set the username and the password for your
PPP connection. This information is obtained from your ISP. Additional
settings on this window will also depend on your ISP. Click the
Next
button to continue.
QUICK SETUP – PPPoE
This window allows you to enable IGMP multicasting and WAN service.
Most users will want to leave the MTU value at the default setting unless
your ISP advises you to change it. Click the
Next
button to continue.
Page 34 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
34
QUICK SETUP – PPPoE
This window allows you to enter an IP address and subnet mask for the
LAN interface. In addition, you can either enable or disable the DHCP
server.
To enable the DHCP server, enter a starting IP address, an ending IP
address, and a subnet mask. You may also choose to change the default
value of the leased time. Click the
Next
button to continue.
QUICK SETUP - PPPoE
This window allows you to configure Wireless settings of the Router. Tick
Enable Wireless
and enter SSID to enable Wireless LAN. Click the
Next
button to continue.
Page 35 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
35
QUICK SETUP – PPPoE
This summary window allows you to confirm the settings you have just
made. Click the
Save/Reboot
button to save your new PPP over Ethernet
settings and restart the Router.
19216811.live