Page 26 / 86
Scroll up to view Page 21 - 25
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
26
QUICK SETUP – BRIDGING
To enable bridging, tick the Enable Bridge Service check box and enter a
Service Name.
To disable WAN service, unselect the check box.
Click the
Next
button to continue.
QUICK SETUP – BRIDGING
This window allows you to configure the Router IP address and subnet
mask for your LAN. Once you have entered an IP address and subnet
mask, click the
Next
button to continue.
QUICK SETUP – BRIDGING
This window allows you to configure Wireless settings of the Router. Tick
Enable Wireless
and enter SSID to enable Wireless LAN. Click the
Next
button to continue.
Page 27 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
27
QUICK SETUP – BRIDGING
This summary window allows you to confirm the bridging settings you
have just made. Click the
Save/Reboot
button to save your new bridging
settings and restart the Router.
Page 28 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
28
QUICK SETUP – PPPoA
Click the PPP over ATM (PPPoA) radio button on this window. This
window also allows you to use the drop-down menu to select the desired
Encapsulation Mode. Click the
Next
button to continue.
Page 29 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
29
QUICK SETUP – PPPoA
This window allows you to set the username and the password for your
PPP connection. This information is obtained from your ISP. Additional
settings on this window will also depend on your ISP. Click the
Next
button to continue.
QUICK SETUP - PPPoA
This window allows you to enable IGMP multicasting and WAN service.
Most users will want to leave the MTU value at the default setting unless
your ISP advises you to change it. Click the
Next
button to continue.
Page 30 / 86
Appendix A – Troubleshooting
D-Link DSL-2640U User Manual
30
QUICK SETUP - PPPoA
This window allows you to enter an IP address and subnet mask for the
LAN interface. In addition, you can either enable or disable the DHCP
server.
To enable the DHCP server, enter a starting IP address, an ending IP
address, and a subnet mask. You may also choose to change the default
value of the leased time. Click the
Next
button to continue.
QUICK SETUP - PPPoA
This window allows you to configure Wireless settings of the Router. Tick
Enable Wireless
and enter SSID to enable Wireless LAN. Click the
Next
button to continue.
19216811.live