Page 36 / 154
Scroll up to view Page 31 - 35
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 36
In this section we can configure the Local Area Network (LAN) parameters.
IP Address:
Enter the local IP address for this router here. This IP address
is also used to connect to this device’s Web User Interface.
Please
note
that after changing this IP address you’ll be forced to log into the
Web User Interface again, using the new IP address.
Subnet Mask:
Enter the subnet mask used here.
Enable IGMP Snooping:
Select this option to enable the IGMP snooping
option.
Standard Mode:
Select this option to enable the IGMP Snooping standard
mode.
Blocking Mode:
Select this option to enable the IGMP Snooping blocking
mode.
Enable LAN side firewall:
Click the checkbox to enable this option.
Page 37 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 37
IPv6 Autoconfig
To access the
IPv6 Autoconfig
page, click on the
Setup
menu link, at the top, and then click on the
IPv6 Autoconfig
menu link, on the left.
On this page the user can configure services related to the
IPv6
connectivity of this
product.
In this section we can enter the
Interface Address
used here.
Page 38 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 38
Enable IPv6 LAN Applications.
Enable DHCPv6 Server:
Click the checkbox to enable the DHCPv6 Server.
Enable RADVD:
Click the checkbox to enable RADVD.
Enable MLD Snooping:
Click the checkbox to enable MLD Snooping. There are
two options to choose from,
Standard Mode
and
Blocking Mode
.
Enable MLD LAN to LAN Multicast:
Select Disable or Enable. Please read the
precaution about enabling and disabling the service.
Click the
Apply/Save
button to accept the changes made.
Page 39 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 39
Time and Date
To access the
Time and Date
page, click on the
Setup
menu link, at the top, and then click on the
Time and Date
menu link, on the left.
On this page the user can configure services related to the time and date feature of
this product.
Time Servers
and a
Time Zone
can be specified here.
In this section we can configure the
Time Settings
for this router.
Select the
Automatically synchronize with Internet time server
option and then
select the
First NTP time server
and
Second NTP time server
form the list here.
When the option
Other
is selected, manually enter the time server’s URL or IP
address in the space provided.
Page 40 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 40
In this section we can select and configure the appropriate
Time Zone Offset
.
In this section we can configure the following parameters.
Time zone offset:
Select the appropriate time zone offset here.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made.
19216811.live