Page 46 / 154
Scroll up to view Page 41 - 45
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 46
Wireless Mode:
Select between Access Point and Wireless Ethernet from the drop-
down menu
URE Mode:
Select On or Off
STA Retry Time (sec):
Select between Bridge (Range Extender) and Routed
(Travel Router)
Beamforming Transmission (BFR):
By default this is greyed out and disabled.
Beamforming Reception (BFE):
By default this is greyed out and disabled.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made.
Page 47 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 47
In the nex
t section we’ll discuss the Wireless
MAC Filtering
configurations.
MAC Filtering
Click the
MAC Filtering
button to access the
Advanced Wireless MAC Filtering
configuration page.
After clicking the
MAC Filtering
button the following page is available.
Page 48 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 48
In this section we can configure the Wireless MAC Filtering parameters.
Select SSID:
Select the appropriate SSID used here.
MAC Restrict Mode:
Select the MAC restrict mode used here. Options to choose
from are
Disabled
,
Allow
, and
Deny
.
In this section a list of
DHCP Leases
will be displayed.
Click the
Add
button to add a new entry.
Select the
Remove
option and click the
Remove
button to remove the specific entry.
After clicking the
Add
button the following page is available.
In this section we can enter a
MAC Address
used in the MAC filtering rule here. The
MAC address must use the
00:11:22:33:44:55
format.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made and return to the main page.
Page 49 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 49
Security Settings
Click the
Advanced Settings
button to access the
Security Settings
configuration
page.
After clicking the
Security Settings
button the following page is available.
In the
Manual Setup AP
section, you can configure the following:
Select SSID:
Select the SSID from the drop-down list
Network Authentication:
Select the network authentication method. Options to
choose from are
Open
,
Shared
,
802.1X
,
WPA2
,
WPA2-PSK
,
Mixed
WPA2/WPA
, and
Mixed WPA2/WPA-PSK
.
Protected Management Frames:
Select between Disabled, Capable, or Required.
WEP Encryption:
Select to enable or disable WEP encryption.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made and return to the main page.
Page 50 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 50
Wireless Security Mode
–
Shared
Wired Equivalent Privacy (WEP)
is any entry level wireless security method that we can use to prevent unauthorized wireless access to this router. WEP is not a very
secure option, but it is better than no wireless security.
After selecting to use
Shared
network authentication and enabling the WEP
encryption option as your wireless security mode, the following parameters will be
available to configure:
Protected Management Frames:
Select to
Disable
,
Capable
, or
Required
.
WEP Encryption:
By default it’s d
isabled.
Encryption Strength:
Select the WEP key length value used here. Options to
choose from are
128 bit (26 hex digits)
and
64 bit (10 hex digits)
.
Current Network Key:
Select one of the 4 key options available and enter a
wireless security key in the appropriate space provided. This key must be
configured on all the wireless clients for them to be able to connect to your
wireless network.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made and return to the main page.
19216811.live