Page 16 / 154
Scroll up to view Page 11 - 15
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 16
Setup Category
The
Setup
category is designed to assist the user with essential configurations, concerning the initial setup of this product.
The following pages can be found in the
Setup
category:
Wan Service
–
On this page the user can configure services related to the
WAN connectivity of this product.
Wireless 2.4G
–
On this page the user can configure services related to the
Wireless 2.4GHz connectivity of this product.
Local Network
–
On this page the user can configure services related to the
Local Area Network connectivity of this product. Services available for
configuration are
LAN Interface
configuration and
DHCP
configuration.
IPv6 Autoconfig
–
On this page the user can configure services related to
the IPv6 connectivity of this product.
Time and Date
–
On this page the user can configure services related to the
time and date feature of this product.
Time Servers
and a
Time Zone
can be
specified here.
Logout
–
On this page the user can log out of the router.
Page 17 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 17
WAN Service
To access the
WAN Service
page, click on the
Setup
menu link, at the top, and then click on the
WAN Services
menu link, on the left.
On this page the user can configure services related to the WAN connectivity of this
product.
Page 18 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 18
ATM Interface
Click the
ATM Interface
button to access the ATM Interface WAN Settings
configuration page.
After clicking the
ATM Interface
button, the DSL ATM Interface Configuration page
will be available.
In the
ATM Interface Configuration
section, here, we can view a list of existing
interfaces configured.
Click the
Add
button to add a new interface.
Select the
Remove
option and click the
Remove
button to remove the specific
interface.
Page 19 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 19
After clicking the
Add
button, the ATM PVC Configuration page will be available.
Enter the correct VPI and VCI values. These can also be changed if requested to do
so by the Internet Service Provider (ISP).
Select the appropriate
DSL Latency
option. Options to choose from are
Path0 (Fast)
and
Path1 (Interleaved)
.
Here we can select the
DSL Link Type
used. The
Encapsulation Mode
will change
depending on the
DSL Link Type
selected. Options to choose from are
EoA
,
PPPoA
, and
IPoA
.
After selecting the
EoA
option, select the
Encapsulation Mode
. Options to choose from are
LLC/SNAP-BRIDGING
and
VC/MUX
.
After selecting the
PPPoA,
select the
Encapsulation Mode
. Options to choose from
are
VC/MUX
and
LLC/ENCAPSULATION
.
After select the
IPoA
option, select the
Encapsulation Mode
. Options to choose
from are
LLC/SNAP-ROUTING
and
VC/MUX
.
Here we can select the
Service Category
. Options to choose from are
UBR Without
PCR
,
UBR With PCR
,
CBR
,
Non Realtime VBR
, and
Realtime VBR
.
After selecting
UBR Without PCR
, the
Minimum Cell Rate
field will be available.
Enter the
Minimum Cell Rate
value here.
After selecting
UBR With PCR
, the
Peak Cell Rate
field will be available. Enter the
Peak Cell Rate
value here.
Page 20 / 154
D-Link DSL-225 11N VDSL2 Router User Manual
Web User Interface Configuration
Page 20
After selecting
CBR
, the
Peak Cell Rate
field will be available. Enter the
Peak Cell
Rate
value here.
After selecting
Non Realtime VBR
, the
Peak Cell Rate
,
Sustainable Cell Rate
, and
Maximum Burst Size
fields will be available. Enter the
Peak Cell Rate
,
Sustainable
Cell Rate
, and
Maximum Burst Size
values here.
After selecting
Realtime VBR
, the
Peak Cell Rate
,
Sustainable Cell Rate
, and
Maximum Burst Size
fields will be available. Enter the
Peak Cell Rate
,
Sustainable
Cell Rate
, and
Maximum Burst Size
values used here.
Select the
Select Scheduler for Queues of Equal Precedence as the Default
Queue
option here. Options to choose from are
Weighted Round Robin
and
Weighted Fair Queuing
.
Also enter the
Default Queue Weight
,
Default Queue Precedence
,
VC WRR
Weight
, and
VC Precedence
value used here.
Click the
Back
button to return to the previous page.
Click the
Apply/Save
button to accept the changes made.
Click the
Cancel
button to discard the changes made and return to the main page.
19216811.live