DSA-3100 Airspot Public/Private Gateway User Manual

24

•

Step7. Setup Completed.

Please click

Restart

to reboot your DSA-3100.

Figure 4-19

Setup Completed

2. System

Table 4-2 lists the System Configure Page Field and Description that helps you can easy setup

System Configure

(Figure 4-20), and don’t forget to click

Apply

to enable this function

Table 4-2

System Configuration Page Field and Description

Field

Description

System Name

Name of this facility, DSA-3100 is the default.

Admin Detail

The system administrator’s information, for instance his name, phone

number, and e-mail, etc.

If a user encounters problem connecting to WAN

Port of DSA-3100, system admin information will be shown on user login

page.

Succeed Page

Enter a URL for all users to be directed to after successful login, usually

defined as the home page of a corporation, for instance:

.

No matter which URL a user originally attempts to

connect, he/she will be directed to the URL defined here

DSA-3100 Airspot Public/Private Gateway User Manual

25

Time

The DSA-3100 supports the NTP protocol. You must specify a time server’s

for DSA-3100. The time zone of the DSA-3100 internal clock is

UTC

(Coordinated Universal Time, formerly know as GMT, Greenwich Mean Time)

DNS Server

Specify DNS servers for DSA-3100, can be Preferred DNS server (Primary)

and Alternate DNS server (Secondary).

Figure 4-20

System Configuration Page

Note:

After changing configuration information, you had better restart the DSA-3100 to ensure

proper system operation with the new configuration.

3. WAN

WAN

The DSA-3100 offers three ways for WAN to obtain IP address:

Static IP Address:

Manually specify WAN Port IP address, Subnet mask, Default

Gateway. Suitable when WAN Port cannot automatically obtain an IP address.

DSA-3100 Airspot Public/Private Gateway User Manual

26

Figure 4-21

Static IP Address Configuration

Dynamic IP Address:

Suitable when WAN Port can automatically obtain an IP

address; for instance when a DHCP Server is in the network connected to WAN Port.

You can click the

Renew

button to renew the IP configuration.

Figure 4-22

Dynamic IP Address Configuration

PPPoE Client:

If you are xDSL user and use PPPoE to Internet, please select

PPPoE,

then you must enter

User Name

and

Password

. The Maximum Idle Time and Dial on

demand are optional.

Figure 4-23

PPPoE Client Configuration

DSA-3100 Airspot Public/Private Gateway User Manual

27

4 Public LAN

Public LAN

Select one of the Public LAN modes and specify IP address, Subnet Mask then

depend on your request, enable or disable DHCP Configuration.

•

Mode

: The DSA-3100 comes with three Public LAN modes, namely NAT, NAT_IP_PNP and

Router.

NAT mode:

All outbound IP addresses (the addresses must belong to the network

connected to Public LAN Port) on Public LAN Port will be translated to the IP address

of WAN Port to proceed.

Figure 4-24

NAT Mode

NAT_IP_PNP mode:

The clients can use any IP address to connect to DSA-3100. No

matter what’s the client IP address, they can get the DSA-3100’s Login page and

access the Internet correctly.

Figure 4-25

NAT_IP_PNP Mode

ROUTER mode:

All outbound IP addresses on Public LAN Port will retain their

Addresses; DSA-3100 functions as a router in this mode.

Figure 4-26

Router Mode

DSA-3100 Airspot Public/Private Gateway User Manual

28

•

DHCP Configuration:

Configure DHCP Server on Public LANPort.TheDSA-3100 comes

with three DHCP Server options (as shown below):

Disable DHCP Server:

Inactivate DHCP Server.

Enable DHCP Server:

Activate DHCP Server. DHCP Server needs to be configured

properly for successful activation. Related configuration items includes: DHCP Pool

Start IP Address, DHCP Pool End IP Address, Lease Time, Domain Name, WINS IP

Address, Primary DNS server IP Address, Secondary DNS server IP address.

Enable DHCP Relay

: In DHCP Relay mode.

It is required to specify other DHCP

Server IP addresses to select this mode.

Figure 4-27

DHCP Server Enable

5. Private LAN

Private LAN:

Select one mode for Private LAN Port and specify IP address, Subnet Mask,

then depend on your request, enable or disable DHCP Configuration.