D-Link DSA-3100 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 87 Scroll up to view Page 6 - 10

DSA-3100 Airspot Public/Private Gateway User Manual

4

Public LAN Port:

Connect to the Managed Network here. The Managed Network’s interface maybe is a

traditional wired Ethernet or an IEEE 802.11 wireless LAN. All of the users under the Public

LAN Port must to login before. If they want to access any network resource.

Private LAN Port:

Connect to the PC, hub or switch to this port. Private LAN port for connecting a Trusted

Network onto the DSA-3100, which permits access to WAN, and LAN from Private LAN

without Public LAN, but must under the Firewall rules. You can put the Web server, Mail server

or FTP server under the Private LAN Port.

DC Power Outlet:

Connect the supplied power adapter here.

Console Port:

If you need to configure the admin password, please connect one PC to this port and change

above items with the terminal linking applications on the PC, e.g. HyperTerminal. (96000,

8-N-1)

d. Specification

• CPU: Intel Xscale IXP420@266MHz

• System Memory:

-32MB DRAM

- 16 MB Flash

• Ethernet MAC: D-Link DL10030B Ethernet 10/100Base-TX MAC+PHY

• Switch IC: ICPlus 175A

• Power: 3A/5V

Page 12 / 87

DSA-3100 Airspot Public/Private Gateway User Manual

5

e. Key Features

Figure 1-3

DSA-3100 Network View Page

• Manages up to 250 users account data with internal user account database.

• Manages up to 2000 on-demand users account data with internal on-demand user database

• Provide 5 local user groups to define different bandwidth for each local user group.

• Supports at least 50 on-line users.

• ID/Password based Public LAN and Authorization, which could be combined with MAC

address locking to provide stricter access control.

• Supports POP3, RADIUS and LDAP external Public LAN mechanism. Only one of them

could be chosen at once.

• Provides on-line status monitoring and history traffic data review.

• SSL protected access to the administration interface and user Public LAN interface.

• Customizable user login, logout, login success, login error, logout success web page.

• Customizable user logout timer.

• Customizable target URL for users who successfully get authorization.

• Console mode administration interface via serial console port.

• Supports NAT for managed clients.

• Supports static IP address, DHCP client and PPPoE client on WAN port interface.

• DHCP server built-in to service managed clients.

• High speed policy routing engine built-in.

• Customizable peremptory traffic redirection. (IP and Port Redirect)

• NTP client built-in.

• Provides a Private LAN port for connecting a Trusted Network onto the DSA-3100, which

permits access to WAN without Public LAN.

• Supports external DSA-3100P printer to print On-demand user’s ID and password. (Optional)

Page 13 / 87

DSA-3100 Airspot Public/Private Gateway User Manual

6

2

I

NSTALLATION

a. Requirements

• Three of standard 10/100Base T network cables with RJ45 connectors.

• TCP/IP network protocol must be installed on all PCs.

b. Procedure

Figure 2-1

Connecting the DSA-3100

You can follow those steps below to install the DSA-3100

1. Ensure the DSA-3100 is power off

2. WAN port connection

3. Private LAN port connection

4. Public LAN port connection

5. Power up

6. Check the LED

Page 14 / 87

DSA-3100 Airspot Public/Private Gateway User Manual

7

1. Ensure the DSA-3100 is power off.

Please check the DSA-3100 front panel power indicator is off.

2. WAN port connection

Use

10/100BaseT network cable

to connect the Unmanaged Network. The Unmanaged

Network’s interface maybe ADSL Router’s LAN port, Cable Modem’s LAN port or Intranet

Switch port.

3. Private LAN port connection

Private LAN port is connected to a Trusted Network without Public LAN. Use

10/100BaseT

network cable

to connect your Admin PC, or Web Server, Mail Server with internal Switch or

Hub that connected to the Private LAN Port on DSA-3100. If you want to directly connect the

DSA-3100 to this PC or the Server or the wireless AP, you have to use a Cross Over Line.

4. Public LAN port connection

Public LAN port is connected to a Managed Network with Public LAN. Use

10/100BaseT

network cable

to connect your Client PC with the internal Switch or Hub that connected to the

Public LAN Port on DSA-3100. If you want to directly connect the DSA-3100 to this PC or the

wireless AP, you have to use a Cross Over Line.

5. Power up

Connect the supplied power adapter to the DSA-3100 and power up.

6. Check the LED

The Power Indicator and WAN Indicator should be ON, if the corresponding WAN Port was

connected to an Unmanaged Network.

Page 15 / 87

DSA-3100 Airspot Public/Private Gateway User Manual

8

The corresponding Private LAN or Public LAN Indicator should be ON while a network device

connected to the Private LAN Port or the Public LAN Internal Port.

c. Configure PCs on Your LAN

After DSA-3100 installation, for each PC, the following procedure may need to be configured:

• TCP/IP network setting

• Internet Access configuration

1. TCP/IP network setting

If Your PC is Windows 95/98/ME/2000/XP, uses the default TCP/IP network setting, no

changes need to be made. Just restart your PC.

DSA-3100 will act as a DHCP Server, automatically providing a suitable IP Address (and

related information) to each PC when the PC starts.

For all non-Server versions of Windows, the default TCP/IP network setting is to act as a

DHCP client. In Windows, it called

Obtain an IP address automatically

.

If using fixed IP Address on your LAN, or you wants to check your TCP/IP setting, refer to

Appendix 1 - Windows TCP/IP Setup.

2. Internet Access Configuration

To configure your PCs to use the DSA-3100 for Internet access, follow this procedure.

For Windows 9x/2000

1

Please select

Star Menu

-

Control Panel

-

Internet Options

.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share