Page 26 / 87
Scroll up to view Page 21 - 25
DSA-3100 Airspot Public/Private Gateway User Manual
19
• When you select
Dynamic IP Address,
please click
Next
.
Figure 4-9
Dynamic IP Address configuration
• When you select
PPPoE Client,
please click
Next
.
Figure 4-10
PPPoE Client configuration
• Please enter the PPPoE Client’s
User name
and
Password
then click
Next
.
Page 27 / 87
DSA-3100 Airspot Public/Private Gateway User Manual
20
Figure 4-11
Set PPPoE Client’s Information
•
Step5. Configure Public LAN Port
Please enter the Public LAN port’s information, such as
IP address
,
Subnet Mask
and
Enable/Disable DHCP Server
on this network segment, then click
Next.
Figure 4-12
Configure Public LAN Port
• When you select Enable DHCP Server, please enter the DHCP scope information, such
as DHCP Start IP Address, DHCP End IP Address, Domain Name, Preferred DNS IP
Address, Alternate DNS IP Address (Option) then click Next .
Page 28 / 87
DSA-3100 Airspot Public/Private Gateway User Manual
21
Figure 4-13
Set DHCP server information
•
Step6. Select Authentication Methods
DSA-3100 provides four types of Authentication methods.
Figure 4-14
Select
Authentication
Methods
•
Local User:
User accounts are stored in the embedded database on DSA-3100.
•
POP3 User:
User accounts are stored in POP3 server.
•
RADIUS User:
User accounts are stored in RADIUS server.
•
LDAP User:
User accounts are stored in LDAP server.
Page 29 / 87
DSA-3100 Airspot Public/Private Gateway User Manual
22
Please select one, then click
Next
•
When You select
Local User
, please enter
User Name
,
Password
,
MAC
(option) and
choose
Group
then click
ADD
to create one new user account. If you are finish, please click
Next
.
Figure 4-15
Local User configuration
•
When You select
POP3
, please enter POP3 Server’s
IP address/Domain Name and
Server
Port number
then click
Next
.
Figure 4-16
POP3 User configuration
Page 30 / 87
DSA-3100 Airspot Public/Private Gateway User Manual
23
•
When You select
RADIUS
, please enter RADIUS Server’s
IP address/Domain Name
,
Public LAN Port number
,
Accounting Port number
,
Secret Key
,
Accounting Service
,
Public LAN Method
, then click
Next
.
Figure 4-17
RADIUS User configuration
•
When You select
LDAP,
please enter LDAP Server’s
IP address/Domain Name
,
Server
Port number
then click
Next .
Figure 4-18
LDAP User configuration
19216811.live