Page 41 / 150 Scroll up to view Page 36 - 40
37
ADVANCED > User Access
The
User Access
screen allows you to create and maintain an authorized list of
users that are allowed to access the print server.
User Access
By configuring the
Enable Authorised User List
option (
Yes
), the user in the
User List is permitted to access the print server. Any user who is not added in the
User List will not be allowed to access the print server. Once you have changed
the settings in each option, click Apply Settings to store the settings, or Cancel to
abandon.
Page 42 / 150
38
Authorised Users
You can add or delete any user to or from the User List. The User List at the
bottom of the screen displays the current defined user and related information for
the print server.
Page 43 / 150
39
ADVANCED > E-Mail Notification
The
E-Mail Notification
screen allows you to assign an E-mail address to the
print server, so that your mail of the account can be printed out directly through
the printer (ASCII text only). This screen also allow you choose where to send an
email when the printer status changes.
Page 44 / 150
40
Enable E-mail Notification
You can set the print server to send an alert message when the printer status
changes through E-mail. To enable this function, set the
Enable e-mail
notification
option to Yes. Then, input the administrator's E-mail address in the
Destination e-mail Address
field.
E-mail Account Details
You can assign an E-mail address to the print server, so that your mail of the
account can be printed out directly through the printer (ASCII text only). To enable
this function, enter the E-mail account in the
Print Server E-mail Address
field.
Then enter the server address, used to receive your E-mail here, in the Incoming
E-mail (POP3) Server Address field. For
outgoing E-mail (SMTP) Server
Address
field, enter the server address that is used to send your E-mail here.
If your mail server needs to verify the user when sending E-mail, Print Server will
apply the
E-mail Account (POP3) Name
and
E-mail Account (POP3)
Password
to the mail server.
E-mail Printing
This section is for you to do E-mail Printing configuration, including:
E-mail Printing (ASCII Text Only)
: Allows you to enable or disable the E-mail
printing.
Check E-mail Interval
: Allow you to set up a time interval in minute in order to
check/receive E-mail periodically.
After done the configuration, click Apply Settings to restore the new configuration,
or Cancel to abandon.
Page 45 / 150
41
ADVANCED > SNMP
The
SNMP
screen allows you to use SNMP (Simple Network Management
Protocol) to manage complex networks.
SNMP Management
Community 1/2/3
: Enter a name in the
Name
frame, and configure the
Access
Right
by selecting
Read Only
or
Read/ Write
from the pull-down menu.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top