17

Print Server

: This field allows you to manually discover the connected print

server and to do further configuration of the print server that is selected from

the list.

18

LAN

: You may also to specify dynamic or static IP address for your print

server. Then click

Apply

button to implement the new setting.

Port Information

: This is the main function of the

PS-Wizard

for you to

easily add a printer on your computer.

To add a printer, click

, then the following window will display.

19

The wizard provides three ways for you to select printer driver:

1. Show current installed drivers:

You may select this option, “

Show currently installed drivers

”, to check if the

same printer driver already existed for use. If not, you may try the next method.

After done the selection of printer driver, click

Next>

button to continue.

2. Select from manufacturer list:

Check this option, “Select from manufacturer list”, to manually select your printer

from drop-down menus by brand and model. Click

Next>

button to continue when

you find a desired driver. If not, try the last way (

Have Disk

). After done the

selection of printer driver, click

Next>

button to continue.

3. Have Disk:

Click

Have Disk

button to bring up the following window. Insert the manufacture’s

installation CD-ROM to install the printer driver. After the correct driver is selected,

click

OK

button to continue.

20

After done the selection of printer driver, the wizard will ask you to confirm your

selection again in the following window. Beside, you are allowed to edit the name

of the printer in the field “

Network Printer Name

” and enable this printer as the

default printer by checking the box “

Use this printer as the default printer for

Windows-based programs

”.

After you done the verification and configuration in the following window, click

Next>

button to continue. Then the printer (e.g. HP Laser 2000 used in this

manual) will be auto-created in Windows’

Printers and Faxes

window as the

following illustration.

21

When the following window shows up, you may do print test by clicking

Print Test

Page

button to check if you can do printing normally. If yes, then click

Finish

button to exit the installation window and now you may start your printing tasks.