22

Using the Web Configuration

Home

To begin managing the DP-301P+, simply launch the browser (e.g. Internet

Explorer 6.0 used in this manual) you have installed on your computer and direct it

to the URL address: dlink-xxxxxx, where xxxxxx are the last six digits of

DP-301P+’s MAC address. The MAC address can be found on the bottom side of

the DP-301P+ device.

When you enter the correct URL, a password input dialog will pop up the following

screen. Input “admin” in the

User name

field, leave the

Password

field as blank,

and then click

OK

button.

23

Then the main screen of the print server’s configuration will appear (see below). In

addition to the product information, you can access and control the print server’s

configuration through five links on the top of this main screen:

Setup

,

Advanced,

Maintenance

,

Status

, and

Help

. You may click a desired link from the bar, to

display its submenu and select a desired option listed in the left column, and then

the corresponding content will show up in the center column.

24

SETUP > Print Server Setup

The

Print Server Setup

screen allows you to modify the

Print Server Name

and

Port Name

, as below shows. D-Link does not recommend changing these

settings unless asked to do so by your network administrator.

Print Server Name

In this field, you can configure the basic information of print server. The basic

information contains a name of the print server, assigned in

Server Name

field,

and a location for the print server, assigned in

Location

(optional) field.

25

Port Settings

In this field, you can assign the Port Name for the print server, and the description

for the Printer port. It also allows you to select the PJL Printer setting (Yes or No).

NOTE

: PJL (Printer Job Language) has certain job requirements that must

be met to work correctly. For more information, please refer to your printer's

manual.

Once you have changed the settings in each option, click Apply Settings to store

the settings, or Cancel to abandon.

26

SETUP

>

LAN Setup

The

LAN Setup

screen allows you configure the local network settings of print

server. Please note that this section is optional and you should not need to

change any of the settings here to get print server up and running.

TCP/IP

This field allows you to assign IP address in manual or automatic method. When

you choose Manually Assign, you should enter the related information in the

following boxes, including IP Address, Subnet Mask, and Default Gateway.

Once you have changed the settings in each option, click Apply Settings to store

the settings, or Cancel to abandon.