Page 36 / 150
Scroll up to view Page 31 - 35
32
After done the selection of printer driver, the wizard will ask you to confirm your
selection again in the following window. Beside, you are allowed to edit the name
of the printer in the field “
Network Printer Name
” and enable this printer as the
default printer by checking the box “
Use this printer as the default printer for
Windows-based programs
”.
After you done the verification and configuration in the following window, click
Next>
button to continue. Then the printer (e.g. HP Laser 2000 used in this
manual) will be auto-created in Windows’
Printers and Faxes
window as the
following illustration.
Page 37 / 150
33
When the following window shows up, you may do print test by clicking
Print Test
Page
button to check if you can do printing normally. If yes, click
OK
button to
close the
D-Link Add Printer Wizard
dialogue screen.
Page 38 / 150
34
If yes, then click
Finish
button to exit the installation window and now you may
start your printing tasks.
Page 39 / 150
35
ADVANCED > Advanced LAN
The
Advanced LAN
screen allows you to further network setting of print server,
while you are recommended better not to change the settings unless instructed to
modify the setting by your network administrator. The
Advanced LAN
screen
contains these fields:
TCP/IP
,
Microsoft Network,
and
AppleTalk
.
Page 40 / 150
36
TCP/IP
This field contains four options that allow you to configure the TCP/IP setting:
DNS Server Address
,
UPnP
,
Mac Bonjour/Rendezvous
, and
Second HTTP
Port
.
±
UPnP
: This option allows you to enable or disable UPnP function.
±
Mac Bonjour/Rendezvous
: This option allows you to enable or disable Mac
Bonjour/Rendezvous function.
±
Second HTTP Port
: This option allows you to enable or disable Second
HTTP Port for remote Web Configuration and IPP Printing.
Microsoft Network
Enter the name of the Workgroup that you want the print server associated with in
this field.
AppleTalk
Enter the AppleTalk Zone name in the box. In the following options, enter the
related configuration, such as the printer type.
Chooser Name
: Display the print server's port name.
Printer Type
: Enter the printer's type in this box.
PostScript Level
: Select from the pull-down menu (Level 1 or Level 2).
Font Group
: Select from the pull-down menu.
Once you have changed the settings in each option, click Apply Settings to store
the settings, or Cancel to abandon.
19216811.live