1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-818LW
    5. /
  5. 25
Page 121 / 190 Scroll up to view Page 116 - 120
D-Link DIR-818LW User Manual
116
Section 3 - Configuration
At any point during this wizard, we can change the prefered language
used. To change the language, select the desired language option from
the
Language
drop-down menu, found on the top right of this page.
End of Wizard
Page 122 / 190
D-Link DIR-818LW User Manual
117
Section 3 - Configuration
This will allow you to open a single port. If you would like to open a range of ports, refer to the next page.
Enter a name for the rule or select an application from the
drop-down menu. Select an application and click
<<
to
populate the fields.
Enter the IP address of the computer on your local network
that you want to allow the incoming service to. If your
computer is receiving an IP address automatically from the
router (DHCP), you computer will be listed in the “Computer
Name” drop-down menu. Select your computer and click
<<
.
Enter the port that you want to open next to Private Port
and Public Port. The private and public ports are usually
the same. The public port is the port seen from the Internet
side, and the private port is the port being used by the
application on the computer within your local network.
Select
TCP
,
UDP
, or
Both.
from the drop-down menu.
The schedule of time when the Virtual Server Rule will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. You can
create your own times in the
Tools
>
Schedules
section.
Select
Allow.All
(most common) or a created Inbound filter.
You may create your own inbound filters in the
Advanced.
>.Inbound.Filter
page.
Name:
IP Address:
Private Port/
Public Port:
Protocol Type:
Schedule:
Inbound Filter:
Virtual Server
Advanced
Page 123 / 190
D-Link DIR-818LW User Manual
118
Section 3 - Configuration
This will allow you to open a single port or a range of ports.
Port Forwarding
Enter a name for the rule or select an application from the
drop-down menu. Select an application and click
<<
to
populate the fields.
Enter the IP address of the computer on your local network
that you want to allow the incoming service to. If your
computer is receiving an IP address automatically from the
router (DHCP), you computer will be listed in the “Computer
Name” drop-down menu. Select your computer and click
<<
.
Enter the TCP and/or UDP port or ports that you want
to open. You can enter a single port or a range of ports.
Separate ports with a common.
Example: 24,1009,3000-4000
The schedule of time when the Virtual Server Rule will be
enabled. The schedule may be set to
Always
, which will
allow the particular service to always be enabled. You can
create your own times in the
Tools
>
Schedules
section.
Select
Allow.All
(most common) or a created Inbound filter.
You may create your own inbound filters in the
Advanced.
>.Inbound.Filter
page.
Name:
IP Address:
TCP/UDP:
Schedule:
Inbound Filter:
Page 124 / 190
D-Link DIR-818LW User Manual
119
Section 3 - Configuration
Enter a name for the rule. You may select a pre-defined
application from the drop-down menu and click
<<
.
This is the port used to trigger the application. It can be
either a single port or a range of ports.
Select the protocol of the trigger port (TCP, UDP, or Both).
This is the port number on the Internet side that will be used
to access the application. You may define a single port or a
range of ports. You can use a comma to add multiple ports
or port ranges.
Select the protocol of the firewall port (TCP, UDP, or Both).
The schedule of time when the Application Rule will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. You can
create your own times in the
Tools
>
Schedules
section.
Name:
Trigger:
Traffic Type:
Firewall:
Traffic Type:
Schedule:
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others.
These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of
these applications work with the DIR-818LW. If you need to run applications that require multiple connections, specify the
port normally associated with an application in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the
firewall (public) ports associated with the trigger port to open them for inbound traffic.
The DIR-818LW provides some predefined applications in the table on the bottom of the web page. Select the application you
want to use and enable it.
Page 125 / 190
D-Link DIR-818LW User Manual
120
Section 3 - Configuration
QoS Engine
The QoS Engine option helps improve your network gaming performance by
prioritizing applications. By default the QoS Engine settings are disabled and
application priority is not classified automatically. The QoS section contains a
queuing mechanism, traffic shaping and classification. It supports two kinds
of queuing mechanisms. Strict Priority Queue (SPQ) and Weighted Fair Queue
(WFQ). SPQ will process traffic based on traffic priority. Queue1 has the highest
priority and Queue4 has the lowest priority. WFQ will process traffic based on
the queue weight. Users can configure each queue’s weight. The sum of all the
queue’s weight must be 100. When surfing the Internet, the system will do traffic
shaping based on the uplink and downlink speed. The classification rules can be
used to classify traffic to different queues, then SPQ or WFQ will do QoS based on
the queue’s priority or weight.
The following parameters will be available for configuration:
Enable QoS:
This option is disabled by default. Enable this option for
better performance and experience with online games and
other interactive applications, such as VoIP.
Uplink Speed:
The speed at which data can be transferred from the router
to your ISP. This is determined by your ISP. An ISP often
defines speed as a download/upload pair. For example,
1.5 Mbits/284 Kbits. Using this example, you would enter
284. Alternatively you can test your uplink speed with a
service such as www.dslreports.com.
Downlink
Speed:
The speed at which data can be transferred from the ISP to
the router. This is determined by your ISP. ISP’s often define
speed as a download/upload pair. For example,
1.5 Mbits/284 Kbits.
Using this example, you would enter 1500. Alternatively
you can test your downlink speed with a service such as
www.dslreports.com.
Queue Type:
Here the user can specify the queue type used. When choosing the option Strict Priority Queue, the router will apply QoS based on the
internal specification for the queue IDs listed. When choosing the option Weight Fair Queue, the router will apply QoS based on the user
defined percentage in the Queue Weight column.
Queue ID:
In this column the Queue ID used will be displayed.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top