Page 101 / 190
Scroll up to view Page 96 - 100
D-Link DIR-818LW User Manual
96
Section 3 - Configuration
Media Server
This page will allow you to enable a DLNA Media Server or enable the iTunes Server. DLNA (Digital Living Network Alliance) is the standard for
the interoperability of Network Media Devices (NMDs). The user can enjoy multimedia applications (music, pictures and videos) on your network
connected PC or media devices. If you agree to share media with devices, any computer or device that connects to your network can play your
shared music, pictures and videos.
Note:
The shared media may not be secure. Allowing any devices to stream is recommended only on secure networks.
Select whether to enable or disable the DLNA Media Server
functions.
Choose a name for your DLNA media server so that it can be
found.
Choose the location of the folder you wish to share or check
the box to use the root folder of the entire drive.
Select whether to enable or disable the iTunes Server functions.
Choose the location of the iTunes Library folder you wish to
share or check the box to use the root folder if it is located on
the root folder of the connected drive.
DLNA Server:
DLNA Server
Name:
Folder:
iTunes Server:
Folder:
Page 102 / 190
D-Link DIR-818LW User Manual
97
Section 3 - Configuration
IPv6
On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Web-
based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection.
For the beginner user that has not configured a router before, click on the
IPv6.Internet.Connection.Setup.Wizard.
button and the router will guide
you through a few simple steps to get your network up and running.
For the advanced user that has configured a router before, click on the
Manual.
IPv6.Internet.Connection.Setup
button to input all the settings manually.
To configure the IPv6 local settings, click on the
IPv6.Local.Connectivity.
Setup
button.
Page 103 / 190
D-Link DIR-818LW User Manual
98
Section 3 - Configuration
IPV6 ULA allows you to configure a unique local unicast address for your router
and is useful for Local IPv6 communications
Enable ULA:
Use default
ULA prefix:
ULA Prefix:
Check this option to enable support for ULA.
Leave checked to use the default ULA prefix configured by
your router. If uncheck, you can specify what prefix ULA
should use in the following field.
If
Use.default.ULA.prefix
is unchecked, you must specify
a ULA prefix that will be used by your router for IPV6 local
connectivity.
Page 104 / 190
D-Link DIR-818LW User Manual
99
Section 3 - Configuration
IPv6 Internet Connection Setup Wizard
On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard.
Click the
IPv6.Internet.Connection.Setup.Wizard
button and the router will
guide you through a few simple steps to get your network up and running.
Click
Next
to continue to the next page. Click
Cancel
to discard the changes
made and return to the main page.
The router will try to detect whether its possible to obtain the IPv6 Internet
connection type automatically. If this succeeds then the user will be guided
through the input of the appropriate parameters for the connection type
found.
Page 105 / 190
D-Link DIR-818LW User Manual
100
Section 3 - Configuration
However, if the automatic detection fails, the user will be prompt to either
Try.again.
or to click on the
Guide.me.through.the.IPv6.settings
button to
initiate the manual continual of the wizard.
There are several connection types to choose from. If you are unsure of your
connection method, please contact your IPv6 Internet Service Provider.
Note:
If using the PPPoE option, you will need to ensure that any PPPoE client
software on your computers has been removed or disabled. The 3 options
available on this page are
.IPv6.over.PPPoE,.Static.IPv6.address.and.Route
,
and
Tunneling.Connection
.
Choose the required IPv6 Internet Connection type and click on the
Next
button to continue. Click on the
Prev
button to return to the previous page.
Click on the
Cancel
button to discard all the changes made and return to the
main page.
Click on the
Next
button to continue. Click on the
Prev
button to return to
the previous page.
Click on the
Cancel
button to discard all the changes made and return to the
main page.