Page 111 / 190
Scroll up to view Page 106 - 110
D-Link DIR-818LW User Manual
106
Section 3 - Configuration
Autoconfiguration
Select
Autoconfiguration.(Stateless/DHCPv6)
from
the drop-down menu.
Select either
Obtain. DNS. server. address.
automatically
or
Use.the.following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful.(DHCPv6)
,
SLAAC.+.RDNSS
or
SLAAC.
+.Stateless.DHCPv6
.
Enter the IPv6 Address Lifetime (in minutes).
My IPv6 Connection:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
LAN Link-Local Address:
Enable
Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Lifetime:
Page 112 / 190
D-Link DIR-818LW User Manual
107
Section 3 - Configuration
PPPoE
Select
PPPoE
from the drop-down menu.
Select
Static
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select
Dynamic
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype the password
in the next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1492
is the default MTU.
Select either
Obtain.DNS.server.address.automatically
or
Use.the.following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
My IPv6 Connection:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnection Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Address:
LAN IPv6 Address:
Page 113 / 190
D-Link DIR-818LW User Manual
108
Section 3 - Configuration
LAN Link-Local Address:
Enable Autoconfiguration:
Autoconfiguration Type:
IPv6 Address Lifetime:
Displays the Router’s LAN Link-Local Address.
Check to enable the Autoconfiguration feature.
Select
Stateful.(DHCPv6)
,
SLAAC.+.RDNSS
or
SLAAC.+.Stateless.DHCPv6
.
Enter the IPv6 Address Lifetime (in minutes).
Page 114 / 190
D-Link DIR-818LW User Manual
109
Section 3 - Configuration
IPv6 in IPv4 Tunneling
Select
IPv6.in.IPv4.Tunnel
from the drop-down menu.
Enter the settings supplied by your Internet provider (ISP).
Enter the remote IPv4 address supplied by your Internet
provider (ISP).
Enter the remote IPv6 address supplied by your Internet
provider (ISP).
Enter the remote IPv4 address that will be used on your
internal network.
Enter the remote IPv6 address that will be used on your
internal network.
Enter the subnet prefix length that will be used on your
internal network for IPv6.
Select either
Obtain.DNS.server.address.automatically
or
Use.the.following.DNS.Address
.
Enter the primary and secondary DNS server addresses.
Enter the LAN (local) IPv6 address for the router.
Displays the Router’s LAN Link-Local Address.
My IPv6 Connection:
IPv6 in IPv4 Tunnel
Settings:
Remote IPv4
Address:
Remote IPv6
Address:
Local IPv4 Address:
Local IPv6 Address:
Subnet Prefix
Length:
IPv6 DNS Settings:
Primary/Secondary
DNS Address:
LAN IPv6 Address:
LAN IPv6 Link Local
Address:
Page 115 / 190
D-Link DIR-818LW User Manual
110
Section 3 - Configuration
Check to enable the Autoconfiguration feature.
Select
Stateful.(DHCPv6)
,
SLAAC.+.RDNSS
or
SLAAC.+.Stateless.DHCPv6
.
Enter the Router Advertisement Lifetime (in minutes).
Enable
Autoconfiguration:
Autoconfiguration
Type:
Pv6 Address
Lifetime:
19216811.live