Page 166 / 197
Scroll up to view Page 161 - 165
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
MAC Filter
On the
Firewall / MAC filter
page, you can configure MAC-address-based filtering for computers
of the router's LAN.
Figure 132. The
Firewall / MAC filter
page.
To specify a new address for the MAC filter, click the
Add
button.
Page
166
of 197
Page 167 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Figure 133. The page for adding an address for the MAC filter.
On the opened page, enter the MAC address of the device from the router's LAN in the
MAC
address
field. To choose a device connected to the router's LAN at the moment, select the relevant
value from the drop-down list (the field will be filled in automatically). Then select the
Deny
value
from the
Action
drop-down list and click the
Change
button.
To remove an address from the list of MAC addresses for filtering, select the line with the relevant
MAC address. On the opened page, click the
Delete
button.
Page
167
of 197
Page 168 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
USB Modem
This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, then upon
the first access to the pages of the
USB modem
menu (under the current web-interface session)
the page for checking the PIN code is displayed
6
. Enter the PIN code in the relevant field and click
the
Enter
button.
Information
On the
USB modem / Information
page, you can view data on the USB modem connected to the
router.
Figure 134. The
USB modem / Information
page.
When a USB modem is connected to the router, the following data are displayed on the page:
Parameter
Description
Vendor
The manufacturer of your USB modem.
Model
The alphanumeric code of the model of your USB modem.
Revision
The revision of the firmware of your USB modem.
6
For GSM USB modems only. For CDMA USB modems, it is required to disable the PIN code check on the
identification card prior to connecting the USB modem to the router.
Page
168
of 197
Page 169 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
IMSI
The code stored in the SIM card inserted to your USB modem.
IMEI
The code stored in the memory of the USB modem.
Signal level
The signal level at the input of the modem's receiver. The zero
signal level shows that you are out of the coverage area of the
selected operator's network.
Operator name
When the needed network is available, the name of the operator is
displayed in this field.
Mode
A type of the network to which the USB modem is connected (2G or
3G).
PIN
On the
USB modem / PIN
page, you can change the PIN code of the identification card inserted
into your USB modem, disable or enable the check of the PIN code.
!
The operations presented on this page are not available for CDMA USB modems.
Figure 135. The
USB modem / PIN
page.
To disable the PIN code check, select the
Disable PIN check
checkbox, enter the current PIN
code in the
PIN code
field and click the
Enter
button.
Page
169
of 197
Page 170 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
To enable the PIN code check, deselect the
Disable PIN check
checkbox, enter the PIN code,
used before disabling the check, in the
PIN code
field and click the
Enter
button.
To change the PIN code, enable the PIN code check, enter the current code in the
PIN code
field,
then enter a new code in
New PIN code
and
New PIN code confirmation
fields and click the
Enter
button.
If upon one of the operations described above you have entered an incorrect value in the
PIN code
field three times (the number of remaining attempts is displayed in the
Attempts left
field), the
identification card inserted into your USB modem is blocked.
Figure 136. Entering the PUK code.
For further use of the card, enter the PUK code in the relevant field, and then specify a new PIN
code for your SIM card in the
New PIN code
and
New PIN code confirmation
fields. Click
the
Enter
button.
Page
170
of 197
19216811.live