Page 146 / 197
Scroll up to view Page 141 - 145
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Advanced
In this menu you can configure advanced settings of the router:
•
create groups of ports for VLANs
•
enable the UPnP function
•
configure a DDNS service
•
add name servers
•
define static routes
•
create rules for remote access to the web-based interface
•
allow the router to use IGMP.
Page
146
of 197
Page 147 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
VLAN
On the
Advanced / VLAN
page, you can create and edit groups of ports for virtual networks
(VLANs).
By default, 2 groups are created in the router's system:
•
lan
: it includes ports 1-8 and the wireless interface;
•
wan
: for the WAN interface; it includes port INTERNET.
The
VLAN ID
parameter is not specified for both groups. Such a setting means that these groups of
ports are not assigned to any VLAN.
Figure 116. The
Advanced / VLAN
page.
To create a new group for VLAN, click the
Add
button.
!
If you want to create a group including LAN ports or the wireless network of
the router,
first delete relevant
records from the
lan
group on this page.
Page
147
of 197
Page 148 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Figure 117. The page for editing a group of ports for VLAN.
You can specify the following parameters:
Parameter
Description
Main settings
Name
A name for the port for easier identification.
Enable
Select the checkbox to allow using this group of ports.
Type
The type of the VLAN which identifier is specified in the
VLAN ID
field.
Local
. The group of this type is a channel used to connect local
clients to the router. It is mostly used to connect different types of
clients, which require separate connection settings.
NAT
. The group of this type is an external connection with address
translation. It is mostly used to connect to the Internet. Later the
VLAN which identifier is specified in the
VLAN ID
field is used to
create a WAN connection (on the
Net / WAN
page).
Transparent
. The group of this type is a transparent connection
between an internal port and an external connection. It is mostly
used to connect IPTV set-top boxes.
Page
148
of 197
Page 149 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Parameter
Description
VLAN ID
An identifier of the VLAN to which this group of ports will be
assigned.
Ports
Port
From the list, select an available value (a physical port of the router,
the wireless interface) to assign it to this group. The port will be
displayed in the table at the bottom of the page.
QoS
A priority tag for the traffic transmitted through the port highlighted
in the table at the bottom of the page.
Tag
Select a value for the port highlighted in the table at the bottom of
the page:
•
tagged
,
•
untagged
.
Click the
Save changes
button.
Click the
Delete port
button to delete the port highlighted in the table at the bottom of the page.
Click the
Delete VLAN
button to delete this group of ports form the system.
!
For further use of groups of ports for VLAN it is required to save the changed settings to
the non-volatile memory of the router and reboot it (click the
Save&Reboot
line in the
top-page menu displayed when the mouse pointer is over the
System
caption).
Page
149
of 197
Page 150 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
UPnP
On the
Advanced / UPnP
page, you can enable and disable the UPnP function.
UPnP is a set of networking protocols designed for automatic configuration of network devices. The
UPnP function performs automatic configuration of the device's parameters for network
applications requiring an incoming connection to the router.
Figure 118. The
Advanced / UPnP
page.
If you want to enable the UPnP function in the router, select the
Enabled
checkbox and click the
Change
button.
If you want to manually specify all parameters needed for network applications, deselect the
Enabled
checkbox and click the
Change
button.
Page
150
of 197
19216811.live