Page 181 / 197
Scroll up to view Page 176 - 180
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Administrator Password
On the
System / Administrator password
page, you can change the password for the
administrator account used to access the web-based interface of the router and to access the device
settings via TELNET.
!
For security reasons, it is strongly recommended to change the administrator password
upon initial configuration of the router.
Figure 145. The page for modifying the administrator password.
Enter the new password in the
Password
and
Confirmation
fields and click the
Save
button.
Page
181
of 197
Page 182 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Configuration
On the
System / Configuration
page, you can save the changed settings to the non-volatile
memory, restore the factory defaults, backup the current configuration, or restore the router's
configuration from a previously created file.
Figure 146. The
System / Configuration
page.
Page
182
of 197
Page 183 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
The following buttons are available on the page:
Control
Description
Save
Click the button to save settings to the non-volatile memory. Please,
save settings every time you change the router's parameters.
Otherwise the changes will be lost upon hardware reboot of the
router.
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware
RESET
button (see the
Saving and Restoring Settings
section, page 36).
Backup
Click the button and follow the dialog box appeared to save the
configuration (all settings of the router) to your PC.
Restore
Click the button to upload a previously saved configuration (all
settings of the router) from a file on your PC. Click the
Choose/Browse
7
button to select a previously saved
configuration file located on your PC.
Actions of the
Save
,
Factory
, and
Backup
buttons also can be performed via the top-page menu
displayed when the mouse pointer is over the
System
caption.
7
The name of the button depends upon the web browser that you use.
Page
183
of 197
Page 184 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
System Log
On the
System / System log
page, you can set the system log options and configure sending the
system log to a remote host.
Figure 147. The
System / System log
page. The
Configuration
tab.
To enable logging of the system events, select the
Logging
checkbox on the
Configuration
tab.
Then specify the needed parameters.
Control
Description
Logging type
Select a type of logging from the drop-down list.
•
Local
: the system log is stored in the router's memory (and
displayed on the
Log
tab). When this value is selected, the
Server
and
Port
fields are not displayed.
•
Remote
: the system log is sent to the remote host specified in
the
Server
field.
•
Local and remote
: the system log is stored in the router's
memory (and displayed on the
Log
tab) and sent to the
remote host specified in the
Server
field.
Logging level
Select a type of messages and alerts/notifications to be logged.
Server
The IP or URL address of the host from the local or global network,
to which the system log will be sent.
Page
184
of 197
Page 185 / 197
DIR-632
Multifunction Wireless Router Supporting WiMAX,
3G GSM/CDMA with Built-in 8-port Switch
User Manual
Configuring via Web-based Interface
Control
Description
Port
A port of the host specified in the
Server
field. By default, the value
514
is specified.
After specifying the needed parameters, click the
Change
button.
To disable logging of the system events, deselect the
Logging
checkbox and click the
Change
button.
On the
Log
tab, the events specified in the
Logging level
list are displayed.
Figure 148. The
System / System log
page. The
Log
tab.
To view the latest system events, click the
Refresh
button.
To save the system log to your PC, click the
Export
button and follow the dialog box appeared.
Page
185
of 197
19216811.live