Page 31 / 120
Scroll up to view Page 26 - 30
27
D-Link DIR-608 User Manual
Section 3 - Configuration
Internet Setup
Click
Internet Setup
on the navigation menu to configure your Internet connection
manually. This section is only recommended for advanced users. It is recommended to use
the Setup Wizard to set up your Internet connection.
WAN Access Type:
Select the Internet Connection protocol from the dropdown menu
your ISP uses. The options are
DHCP
,
Static IP
,
PPPoE
, and
DS-Lite
.
If you choose
DHCP Client
, please configure the following fields:
Host Name:
Enter the host name of the router.
MTU Size:
Enter the MTU size.
Attain DNS
Automatically:
Select this option to obtain a DNS server information automatically.
Set DNS Manually:
Select this option and manually input your DNS server information.
If you choose
Static IP
, please configure the following fields:
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask.
Default Gateway:
Enter the default gateway.
MTU Size:
Enter the MTU size.
DNS Server 1, 2:
Enter the DNS Server IP addresses.
WAN Interface
WAN Interface
WAN Access Type:
DHCP Client
▼
Host Name:
hostname
MTU Size:
1500
Attain DNS Automatically:
Set DNS Manually:
DNS Server 1:
0.0.0.0
DNS Server 2:
0.0.0.0
WAN Interface
WAN Access Type:
Static IP
▼
IP Address:
0.0.0.0
Subnet Mask:
0.0.0.0
Default Gateway:
0.0.0.0
MTU Size:
1500
DNS Server 1:
0.0.0.0
DNS Server 2:
0.0.0.0
(Optional)
WAN Interface Setup
Internet Setup
DIR-608
Setup
Wirele
Page 32 / 120
28
D-Link DIR-608 User Manual
Section 3 - Configuration
If you choose
PPPoE
, please configure the following fields:
User Name:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Service Name:
Enter the ISP service name (optional).
Idle Time:
Set the connection time out length. (Connect on Demand only)
MTU Size:
Enter the maximum transmission unit (MTU) size.
Static IP Address:
Enter the IP address of the router provided by your ISP.
Connection Type:
Select either
Continuous
,
Connect on Demand
, or
Manual
.
Attain DNS
Automatically:
Select this option to obtain DNS server information automatically.
Set DNS Manually:
Select this option to manually input your DNS server information.
Internet Setup (continued)
WAN Interface
WAN Access Type:
PPPoE
▼
User Name:
Password:
Service:
MTU:
1452
Static IP Address:
Connection Type:
Continuous
▼
Attain DNS Automatically:
Set DNS Manually:
DNS Server 1:
0.0.0.0
DNS Server 2:
0.0.0.0
WAN Interface
WAN Access Type:
DS-Lite
▼
DS-Lite Mode:
DS-Lite DHCPv6
Manual
AFTR Name or Address:
If you choose
DS-Lite
, please configure the following fields:
DS-Lite Mode:
Select either
DS-Lite DHCPv6
or
Manual
.
If you choose
Manual
, please configure the
AFTR Name or Address
field.
AFTR Name or
Address:
Enter the AFTR Name or Address.
Page 33 / 120
29
D-Link DIR-608 User Manual
Section 3 - Configuration
When you have finished configuring your Internet connection, click the
Apply Changes
button.
MAC Clone
Select the router’s default MAC address, the PC’s, or enter it manually.
Internet Setup (continued)
WAN Port Rate
Select the connection speed of the Internet WAN Ethernet port. It is recommended to leave
this on the 10/100 Mbps setting to ensure the fastest connection speeds.
Apply Changes
Reset
MAC Clone
Default MAC
MAC from PC
MAC manual
00:00:00:00:00:00
WAN Port Rate
WAN port rate
10/100 Mbps
▼
Page 34 / 120
30
D-Link DIR-608 User Manual
Section 3 - Configuration
PPTP
Click
PPTP
on the navigation menu to configure PPTP (Point-to-Point-Tunneling Protocol)
connection. Your ISP will provide you with a server address, username, and password.
Enable:
Check this box to enable PPTP.
Server:
Enter the PPTP server IP address provided by your ISP.
Auth:
Select
PAP
,
CHAP
,
CHAPMSV2
, or
auto
. The default is
auto
.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Default GW:
Check this box to use the Default Gateway provided by your ISP.
When you have finished configuring your PPTP Connection, click the
Apply
button.
PPTP Settings
PPTP Table
The PPTP Table displays the currently configured PPTP connections. The Interface, State,
Address, and Gateway are displayed.
PPTP Settings
Enable:
☑
Server:
Auth:
auto
▼
Username:
Password:
Default GW:
☐
PPTP Table
Interface
State
Address
Gateway
Apply
Reset
PPTP
PPTP
DIR-608
Setup
Wirele
Page 35 / 120
31
D-Link DIR-608 User Manual
Section 3 - Configuration
L2TP
Click
L2TP
on the navigation menu to configure L2TP (Layer 2 Tunneling Protocol) connection.
Your ISP will provide you with a server address, username, and password.
Session:
Check the radio button to enable L2TP.
Name:
Enter a name for your L2TP connection.
LNS IP:
Enter the L2TP Server address.
LNS Port:
Enter the L2TP Server port number.
Auth:
Select
PAP
,
CHAP
,
CHAPMSV2
, or
auto
. The default is
auto
.
User Name:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Connection Type:
Select either
Continuous
,
Connect on Demand
, or
Manual
.
Idle Time(min):
If
Connect on Demand
is selected, enter a maximum idle time during
which the Internet connection is maintained during inactivity.
NAPT:
Check the radio button to enable NAPT.
Default Route:
Check the radio button to enable Default Route.
MTU:
Enter the MTU size.
When you have finished configuring your L2TP Connection, click the
Apply Changes
button.
L2TP Settings
L2TP Settings
Session:
Disable
Enable
Name:
LNS IP:
LNS PORT:
1701
Authentication:
auto
▼
User Name:
Password:
Connection Type:
Continuous
▼
Idle Time(min):
0
NAPT:
Disable
Enable
Default Route:
Disable
Enable
MTU:
1460
L2TP
L2TP
DIR-608
Setup
Wirele
Apply Changes
Reset
19216811.live