1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-608
    5. /
  5. 10
Page 46 / 120 Scroll up to view Page 41 - 45
42
D-Link DIR-608 User Manual
Section 3 - Configuration
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
My IPv6 Connection is:
6 to 4
▼
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
Primary DNS Address:
Secondary DNS Address:
6to4 Settings
Enter the IPv6 address information provided by your
Internet Service Provider (ISP).
6to4 Address:
6to4 Relay:
0.0.0.0
LAN IPv6 Address Settings
Use this section to configure the internal network settings of
your router. If you change the LAN IPv6 Address here, you
may need to adjust your PC’s network settings to access the
network again.
LAN IPv6 Address:
xxxx::xxxx::xxxx::
0000
::1/64
LAN IPv6 Link-Local
Address:
xx00:yy11:zz22:123/64
My IPv6
Connection is:
Select
IPv6 In IPv4 Tunnel
if you wish to configure your router to
connect to your ISP using 6 to 4. 6 to 4 is an IPv6 address assignment
and automatic tunneling technology that is used to provide unicast
IPv6 connectivity between IPv6 sites and hosts across the IPv4
Internet.
IPv6 Connection Type
6 to 4
6to4 Address:
Displays the 6 to 4 address.
6to4 Relay:
Enter the 6 to 4 relay supplied by your ISP.
6to4 Settings
LAN IPv6 Address:
Enter LAN (local) IPv6 address for the router.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN link-local address.
LAN IPv6 Address Settings
If you choose
Use the following DNS address
, please configure the following field:
Primary DNS
Address:
Enter the primary DNS server address.
Secondary DNS
Address:
Enter the secondary DNS server address.
IPv6 DNS Settings
Select either
Obtain DNS server address automatically
or
Use the following DNS address
.
Page 47 / 120
43
D-Link DIR-608 User Manual
Section 3 - Configuration
Address Autoconfiguration Settings
Use this section to setup IPv6 Autoconfiguration to assign IP
addresses to the computers on your network.
Enable Autoconfiguration:
☑
LAN IPv6 Address:
SLAAC+Stateless DHCP
▼
Router Advertisement
Lifetime:
30
(minutes)
Address Autoconfiguration Settings
Use this section to setup IPv6 Autoconfiguration to assign IP
addresses to the computers on your network.
Enable Autoconfiguration:
☑
LAN IPv6 Address:
Stateful(DHCPv6)
▼
IPv6 Address Range(Start):
xxxx
::00
3
IPv6 Address Range(End):
xxxx
::00
16
Router Advertisement
Lifetime:
(second)
Enable
Autoconfiguation:
Enable or disable the Automatic IPv6 Address Assignment feature.
LAN IPv6 Address:
Select
SLAAC+Stateless DHCP
or
Stateful DHCPv6
.
If you choose
SLAAC+Stateless DHCP
, please configure the following field:
Router
Advertisement
Lifetime:
Enter the IPv6 address lifetime (in minutes).
Address Autoconfiguration Settings
If you choose
Stateful DHCPv6
, please configure the following fields:
IPv6 Address
Range(Start):
Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.
IPv6 Address
Range(End):
Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.
Router
Advertisement
Lifetime:
Enter the IPv6 address lifetime (in seconds).
6 to 4 (continued)
Page 48 / 120
44
D-Link DIR-608 User Manual
Section 3 - Configuration
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
My IPv6 Connection is:
6rd
▼
IPv6 DNS Settings
Obtain DNS server address automatically or enter a
specific DNS server address.
Primary DNS Address:
Secondary DNS Address:
6rd Settings
Enter the IPv6 address information provided by your
Internet Service Provider (ISP).
6rd Mode:
6rd DHCPv4
Manual
6rd IPv6 Prefix:
/
0
IPv4 Address:
192.168.x.x
Mask Length:
0
6rd Relay:
0.0.0.0
My IPv6
Connection is:
Select
6rd
if you wish to to configure your router to connect to your
ISP using 6rd.
IPv6 Connection Type
6rd Mode:
Select either
6rd DHCPv4
or
Manual
.
If you selected
Manual
:
6rd IPv6 Prefix:
Enter the 6rd IPv6 prefix and mask length supplied by your ISP.
IPv4 Address:
Displays the router’s IPv4 address and mask length.
6rd Relay:
Enter the 6rd border relay IPv4 address settings supplied by your ISP.
6rd Settings
6rd
If you choose
Use the following DNS address
, please configure the following field:
Primary DNS
Address:
Enter the primary DNS server address.
Secondary DNS
Address:
Enter the secondary DNS server address.
IPv6 DNS Settings
Select either
Obtain DNS server address automatically
or
Use the following DNS address
.
Page 49 / 120
45
D-Link DIR-608 User Manual
Section 3 - Configuration
LAN IPv6 Address Settings
Use this section to configure the internal network settings of
your router. If you change the LAN IPv6 Address here, you
may need to adjust your PC’s network settings to access the
network again.
LAN IPv6 Address:
LAN IPv6 Link-Local
Address:
xx00:yy11:zz22:123/64
LAN IPv6 Address:
Displays the router’s LAN IPv6 address.
LAN IPv6 Link-
Local Address:
Displays the router’s LAN IPv6 link-local address.
LAN IPv6 Address Settings
6rd (continued)
Enable
Autoconfiguation:
Enable or disable the Automatic IPv6 Address Assignment feature.
LAN IPv6 Address:
Select
SLAAC+Stateless DHCP
or
Stateful DHCPv6
.
If you choose
SLAAC+Stateless DHCP
, please configure the following field:
Router
Advertisement
Lifetime:
Enter the IPv6 address lifetime (in minutes).
Address Autoconfiguration Settings
If you choose
Stateful DHCPv6
, please configure the following field:
IPv6 Address
Range(Start):
Enter the starting IPv6 address for the DHCP server’s IPv6 assignment.
IPv6 Address
Range(End):
Enter the ending IPv6 address for the DHCP server’s IPv6 assignment.
Router
Advertisement
Lifetime:
Enter the IPv6 address lifetime (in seconds).
Address Autoconfiguration Settings
Use this section to setup IPv6 Autoconfiguration to assign IP
addresses to the computers on your network.
Enable Autoconfiguration:
☑
LAN IPv6 Address:
SLAAC+Stateless DHCP
▼
Router Advertisement
Lifetime:
30
(minutes)
Address Autoconfiguration Settings
Use this section to setup IPv6 Autoconfiguration to assign IP
addresses to the computers on your network.
Enable Autoconfiguration:
☑
LAN IPv6 Address:
Stateful(DHCPv6)
▼
IPv6 Address Range(Start):
xxxx
::00
3
IPv6 Address Range(End):
xxxx
::00
16
Router Advertisement
Lifetime:
(second)
Page 50 / 120
46
D-Link DIR-608 User Manual
Section 3 - Configuration
IPv6 Connection Type:
Choose the mode to be used by the router to the IPv6
Internet.
My IPv6 Connection is:
Link-local only
▼
LAN IPv6 Address Settings
Use this section to configure the internal network settings of
your router. If you change the LAN IPv6 Address here, you
may need to adjust your PC’s network settings to access the
network again.
LAN IPv6 Link-Local
Address:
xx00:yy11:zz22:123/64
My IPv6
Connection is:
Select
Local Connectivity Only
if you want to configure your LAN
to use IPv6 but not connect to the Internet.
IPv6 Connection Type
LAN IPv6 Link-
Local Address:
Displays the router’s IPv6 address and mask length.
LAN IPv6 Address Settings
Link-local only

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top