1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DIR-608
    5. /
  5. 5
Page 21 / 120 Scroll up to view Page 16 - 20
17
D-Link DIR-608 User Manual
Section 3 - Configuration
This section will show you how to configure or change the default settings your D-Link
DIR-608 using the web-based configuration utility.
Configuration
Login
Username:
Admin
Password:
Login
To access the configuration utility, open a web browser such as Internet Explorer and enter
in the address field. Enter
Admin
as the username and leave the
password blank. Click
Login
.
After logging in you should see the following
Device Info
section of the web-based interface.
Proceed to the next page.
Device Info
Active Client Table
IPV6
IPV6 Routing Table
Product Page: DIR-608
English
Select Language
▼
DIR-608
Setup
Wireless
Advanced
Maintenance
Status
Help
Wireless Router Status
This page shows the current status and some basic settings of the device.
System
Product Name
DIR-608
Uptime
1 06:35:16
Date/Time
Tue Jul 5 16:09 2016
LAN Configuration
IP Address
192.168.11.1
Page 22 / 120
18
D-Link DIR-608 User Manual
Section 3 - Configuration
Product Page: DIR-608
English
Select Language
▼
DIR-608
Setup
Wireless
Advanced
Maintenance
Status
Help
Wizard
Local Network
Internet Setup
PPTP
L2TP
IPV6
Wireless Basics
WPS
Advanced Wireless
Wireless Repeater
Access Control List
Port Triggering
DMZ
URL Block
Dynamic DNS
Traffic Control
UPnP
Telnet
Virtual Server
IPv6 Filter
IPv6 Routing
Reboot
Firmware Upgrade
Backup/Restore
Admin
Time and Date
Device Info
Active Client Table
IPV6
IPV6 Routing Table
Menu
Wireless
Advanced
Maintenance
Status
Web UI Table of Contents
The web-based interface is divided into six horizontal tabs, each with a vertical menu bar running along the left side.
You may click on these menus to quickly navigate to a section of this document.
To return to this Web UI Table of Contents page, simply click the D-Link logo on the top
right of each page.
Wizard
DIR-608
Setup
Wirele
Page 23 / 120
19
D-Link DIR-608 User Manual
Section 3 - Configuration
Setup
The
Setup
tab provides access to configure the basic configuration settings of your DIR-608.
Product Page: DIR-608
English
Select Language
▼
DIR-608
Setup
Wireless
Advanced
Maintenance
Status
Help
Wizard
Local Network
Internet Setup
PPTP
L2TP
IPV6
To return to the Web UI Table of Contents page, simply click the D-Link logo on the top right
of each page.
Wizard
DIR-608
Setup
Wirele
Page 24 / 120
20
D-Link DIR-608 User Manual
Section 3 - Configuration
Wizard
Easy Setup
The easy setup will tell you how to configure the basic
network parameters. To continue, please click the “Next”
button.
Manual
Next
Wizard
DIR-608
Setup
Wirele
Click
Wizard
on the navigation menu to set up or repair your Internet connection.
Click
Next
to begin the Easy Setup Wizard.
Next:
Starts the Easy Setup Wizard.
Internet Setup:
Redirects you to the
Internet Setup
page. Refer to
Internet Setup
on page
27
for more information.
Easy Setup
This section allows you to configure the IP address of the router.
Easy Setup - WAN Connection Type
The Easy Setup supports three popular types of connection.
To make sure the connection type your ISP provides, please
refer to the ISP.
PPPoE - Usually for ADSL Modem and you will need a
PPPoE username and password from your ISP.
Dynamic IP - Usually for Cable Modem and the router will
automatically obtain an IP address from the DHCP server.
Static IP - This type of connection uses a permanent, fixed
(static) IP address that your ISP assigned.
Back
Next
Easy Setup - WAN Connection Type
Select the connection type your ISP uses:
PPPoE
,
Dynamic IP
, or
Static IP
.
Next:
Proceed to the next step.
Back:
Go back to the last step.
Page 25 / 120
21
D-Link DIR-608 User Manual
Section 3 - Configuration
Easy Setup - PPPoE
Enter the account username and password provided by your
ISP.
User Name:
Password:
Confirm Password:
Account Validate
Back
Next
Easy Setup - PPPoE
Enter the account username and password provided by your ISP.
User Name:
Enter your username.
Password:
Enter your password.
Confirm Password:
Enter your password again.
Account Validate:
Test that your PPPoE username and password are correct.
Next:
Proceed to the next step.
Back:
Go back to the last step.
Easy Setup - Static IP
Enter the IP parameters provided by your ISP.
IP Address:
0.0.0.0
Subnet Mask:
0.0.0.0
Default Gateway:
0.0.0.0
Primary DNS:
0.0.0.0
Secondary DNS:
0.0.0.0
(Optional)
Back
Next
Easy Setup - Static IP
Enter the account username and password provided by your ISP.
IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask.
Default Gateway:
Enter the default gateway.
Primary DNS:
Enter the primary DNS address.
Secondary DNS:
Enter the secondary DNS address.
Wizard (continued)
If you choose
PPPoE
, please configure the following fields and click
Next
.
If you choose
Static IP
, please configure the following fields and click
Next
.

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top