Page 26 / 97 Scroll up to view Page 21 - 25
26
D-Link DIR-600 User Manual
Section 3 - Con±guration
Enter a Wireless Security Password in the textbox and then click
Next
to continue.
This window displays a summary of your wireless security settings.
Please print this out or record this information in a safe place and
then click
Save
to continue.
The Router will save your new settings and reboot. When it is ±nished
after 1-2 minutes, the opening Wireless Setup window is displayed.
Page 27 / 97
27
D-Link DIR-600 User Manual
Section 3 - Con±guration
To implement Wi-Fi protection, or WCN 2.0, tick the Enable
checkbox, click either
Generate New PIN
or
Reset PIN to
Default
, and then con±gure the Wi-Fi settings below. Please
see the Setting Up Wi-Fi Protection (WCN 2.0 in Windows
Vista) section later in this manual for detailed con±guration
information.
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The
SSID is case-sensitive.
Indicates the channel setting for the DIR-600. By default
the channel is set to 6. The Channel can be changed to
fit the channel setting for an existing wireless network or
to customize the wireless network. The
Auto Channel
Selection
setting can be selected to allow the DIR-600 to
choose the channel with the least amount of interference.
Use the drop-down menu to select the appropriate Transmission Rate in Mbits per second. Many users will want to use the
default setting, Best (automatic).
Enable Wi-Fi Multimedia to enjoy basic quality of service features. WMM prioritizes tra³c according to four access categories:
voice, video, best e²ort, and background.
Check this option if you would not like the SSID of your wireless network to be broadcasted by the DIR-600. If this option is
checked, the SSID of the DIR-600 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID
of your DIR-600 in order to connect to it.
Protected
Setup:
Enable
Wireless
Channel:
Wireless
Network Name:
Transmission
Rate:
WMM Enable:
Enable
Wireless:
Enable Hidden
Wireless:
Page 28 / 97
28
D-Link DIR-600 User Manual
Section 3 - Con±guration
1.
To enable wireless security on the Router,
use
the drop-down menu to select the desired option.
To enable WEP, select Enable WEP Wireless
Security (basic).
2.
Next to
Authentication
, select either Open
or Shared Key. Shared Key provides greater
security.
3.
Select either 64Bit or 128Bit encryption from the
drop-down menu next to
WEP Encryption
.
4.
Next to
Default฀Key฀Type
, select WEP Key 1 and
enter a WEP key that you create. Make sure you
enter this key exactly on all your wireless devices.
You may enter up to four di²erent keys either using
Hex or ASCII. Hex is recommended (letters A-F and
numbers 0-9 are valid). In ASCII all numbers and
letters are valid.
5.
Click
Save฀Settings
to save your settings. If you
are con±guring the Router with a wireless adapter,
you will lose connectivity until you enable WEP on
your adapter and enter the same WEP key as you
did on the Router.
NOTE:
It is recommended to enable encryption on your wireless
Router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless
signal may degrade when enabling encryption due to the added
overhead.
Page 29 / 97
29
D-Link DIR-600 User Manual
Section 3 - Con±guration
1.
To enable Enable WPA/WPA2 Wireless Security
(enhanced).
2.
Next to
Cipher Type
, select TKIP,
AES,
or
AUTO.
3.
Next to
PSK/EAP
, select PSK.
4.
Next to
Network Key
, enter a passphrase. The key
is an alpha-numeric
password between 8 and 63 characters long.
The password can include symbols (!?*&_) and
spaces. Make sure you enter this key exactly
the same on all other wireless clients.
5.
Click
Save฀Settings
to save your settings. If you
are con±guring the router with a wireless adapter,
you will lose connectivity until you enable WPA/
WPA2 (whichever of the three options you have
selected above) on your adapter and enter the
same network key as you did on the router.
Page 30 / 97
30
D-Link DIR-600 User Manual
Section 3 - Con±guration
1.
To enable WPA/WPA2 for a RADIUS server, next
to
Security Mode
, selec or Enable WPA/WPA2
Wireless Security (enhanced).
2.
Next to
Cipher Type
, select TKIP, AES,
or
Auto.
3.
Next to
PSK/EAP
, select EAP.
4.
Next to
RADIUS฀Server฀1
enter the
IP Address
of your RADIUS server.
5.
Next to
Port
, enter the port you are using with your
RADIUS server. 1812 is the default port.
6.
Next to
Shared Secret
, enter the security key.
7.
If you have a secondary RADIUS server, enter its
IP address, port, and secret key.
8.
Click
Save฀Settings
to save your settings.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top