Page 76 / 97
Scroll up to view Page 71 - 75
76
D-Link DIR-600 User Manual
Section 9 - Setting Up a Connection Wirelessly
12.
Once you have saved your network settings to USB,
the
CopyingsettingstotheUSBdrive
window in the
Set up
a wireless router or access point
wizard opens to indicate
the system progress.
13.
Once you are ±nished, the
Toaddadeviceorcomputer,follow
these instructions
window in the
Set up a wireless router or
access point
wizard opens. When you are ±nished, click the
Close
button.
Page 77 / 97
77
D-Link DIR-600 User Manual
Section 10 - Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
Connecting to a Secured Wireless Network
(WEP, WPA-PSK & WPA2-PSK)
The following are step-by-step directions to set up a wireless connection.
2.
Click the
Manage network connections
link in the
Network
and Sharing Center
window.
1. Click on
Properties
.
Page 78 / 97
78
D-Link DIR-600 User Manual
Section 10 - Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
4.
Select a network to connect to in the
Select a network to connect
to
window in the
Connect to a network
wizard and then click the
Connect
button.
5.
The following
Connect to a network
wizard window displays the
system progress.
3.
Right-click the
Wireless Network Connection
entry and then select
Connect/Disconnect
from the drop-down menu.
Page 79 / 97
79
D-Link DIR-600 User Manual
Section 10 - Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
7.
The following
Successfully connected to dlink300
window in the
Connect to a network
wizard is displayed. Choose to save to the
network and/or start the new connection automatically. When you
are ±nished, click the
Close
button.
8.
The successful connection is displayed at the bottom of the
Windows start up menu.
6.
Enter the network security key or passphrase for the Router in
the textbox provided in the
Type the network security key or
passphrase for dlink300
window in the
Connect a network
wizard.
When you are ±nished, click the
Connect
button.
Page 80 / 97
80
D-Link DIR-600 User Manual
Section 10 - Connecting to a Secured Wireless Network (WEP, WPA-PSK & WPA2-PSK)
10.
To test the new IP address, use the Ping feature of the command
prompt.
9.
Con±rm your new settings by calling up the command prompt and
then entering the ipcon±g command.
19216811.live