Page 66 / 97
Scroll up to view Page 61 - 65
66
D-Link DIR-600 User Manual
Section 6 - Setting Up Wi-Fi Protection (WCN 2.0 in Windows Vista)
Setting Up a Configured Router
Once the Router has been con±gured, you can use the push button on the Router or third party software to invite a
newcomer to join your Wi-Fi protected network. For maximum security, the software method is recommended. However,
the push button method is ideal if there is no access to a GUI.
If you are using the Router’s Wi-Fi Security push button option, simultaneously depress the push button located on
the side of the Router and the button on the client (or virtual button on the client’s GUI). Next click
Finish
. The Client’s
software will then allow a newcomer to join your secure, Wi-Fi protected network.
If you are using third party software, run the appropriate Wi-Fi Protected System utility. You will be asked to either use
the push button method or to manually enter the PIN. Follow the on-screen instructions.
Page 67 / 97
67
D-Link DIR-600 User Manual
Section 7 - Changing the Computer Name and Joining a Workgroup
Changing the Computer Name and Joining a
Workgroup
The following are step-by-step directions to change the computer name and join a workgroup.
2.
Click on the
Advancedsystemsettings
link.
1. Click on
Properties
.
Page 68 / 97
68
D-Link DIR-600 User Manual
Section 7 - Changing the Computer Name and Joining a Workgroup
3.
Click the
Computer Name
tab in the
System Properties
window
and enter a description of your computer in the textbox. When you
are ±nished, click the
Change
button.
4.
Go to the
ComputerName/DomainChanges
window and
click the radio button next to the Workgroup you want to
join. When you are ±nished, click the
OK
button.
Page 69 / 97
69
D-Link DIR-600 User Manual
Section 8 - Con±guring the IP Address in Vista
Configuring the IP Address in Vista
The following are step-by-step directions to con±gure the IP address in Windows Vista.
2.
Go to the
Network and Internet
window and click the
appropriate
Local Area Connection
icon.
1. Click on
Properties
.
3.
Right-click the
Local Area Connection
icon and then select
Properties
from the drop-down menu.
Page 70 / 97
70
D-Link DIR-600 User Manual
Section 8 - Con±guring the IP Address in Vista
4.
Tick the
Internet ProtocolVersion 4 (TCP/IPv4)
checkbox in
the
Networking
tab in the
Local Area Connection Properties
window.
5.
Click the “Use the following IP address” option in the
General
tab in the
Local Area Connections Properties
window and
enter the desired IP address in the space o²ered. Then click
the “Use the following DNS server adresses” option on the
same tab and enter the desired DNS server information.
19216811.live