Page 31 / 145
Scroll up to view Page 26 - 30
31
Using the Configuration Menu
Home >VPN Settings > Tunnel > Method > IKE > Select IKE Proposal
IKE Proposal index-
Proposal Name-
DH Group-
Encrypt algorithm-
Auth algorithm-
A list of selected proposal indexes from the IKE proposal pool
listed below.
There are three groups can be selected: group 1 (MODP768),
group 2 (MODP1024), group 5 (MODP1536).
There are two algorithms that can be selected: 3DES and
DES.
There are two algorithms that can be selected: SHA1 and
MD5.
This is the name used to classify the IKE proposal.
Page 32 / 145
32
Using the Configuration Menu
Home >VPN Settings > Tunnel > Method > IKE > Select IKE Proposal
Continued...
Life Time-
Enter in the life time value.
Life Time Unit-
There are two units that can be selected: second and KB.
Proposal ID-
The identifier of IKE proposal can be chosen for adding
corresponding proposal to the dedicated tunnel.
Add
to-
Click it to add the chosen proposal indicated by proposal ID
to IKE Proposal index list.
Page 33 / 145
33
Using the Configuration Menu
Home >VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal
IPSec Proposal
index-
A list of selected proposal indexes from the IPSec proposal
pool listed below.
Proposal Name-
DH Group-
There are three groups that can be selected: group 1
(MODP768), group 2 (MODP1024), group 5 (MODP1536).
Encap protocol-
There are two protocols that can be selected: ESP and AH.
Encrypt algorithm-
There are two algorithms that can be selected: 3DES and
DES.
This is the name used to classify the IPSec Proposal
Auth algorithm-
There are two algorithms that can be selected: SHA1 and
MD5.
Page 34 / 145
34
Using the Configuration Menu
Home >VPN Settings > Tunnel > Method > IKE > Select IPSEC Proposal
Continued...
Life Time-
Enter in a life time value.
Life Time Unit-
There are two units that can be selected: second and KB.
Proposal ID-
The identifier of IPSec proposal can be chosen for adding the
proposal to the dedicated tunnel.
Add
to-
Click it to add the chosen proposal indicated by proposal ID
to IPSec Proposal index list.
Page 35 / 145
35
Using the Configuration Menu
Home >VPN Settings > Tunnel > Manual
Remote Subnet-
The subnet of the remote VPN gateway’s local network. It
can be a host, a partial subnet or a whole subnet.
Remote Netmask-
The subnet of the remote VPN gateway’s local network.
It can be a host, a partial subnet or a whole subnet.
Remote Gateway-
The WAN IP address of remote VPN gateway.
Local Subnet-
The subnet of the VPN gateway’s local network. It can be a
host, a partial subnet or a whole subnet.
Local Netmask-
Local netmask combined with local subnet to form a subnet
domain.
Aggressive Mode-
Enabling this mode will accelerate establishing tunnel, but
the device will have less security.
Tunnel Name-
Current tunnel name.
Remote SPI-
The value of the remote SPI should be set in hex format.
Local SPI-
The value of the local SPI should be set in hex format.
Method-
The set of rules applied when connecting to the VPN gateway.
19216811.live