Page 11 / 145
Scroll up to view Page 6 - 10
11
Using the Configuration Menu
Whenever you want to configure your network or the DI-804HV, you can access the
Configuration Menu by opening the web-browser (i.e., Internet Explorer or Netscape
Navigator) and typing in the IP Address of the DI-804HV. The DI-804HV default IP
Address is shown below:
±
Open the web browser
±
Type in the
IP Address
of
Home > Wizard
The
Home>Wizard
screen will
appear.
Please refer to the
Quick Installation Guide
for
more information regarding the
Setup Wizard.
Note:
If you have changed the default IP Address assigned to the DI-804HV, make sure to
enter the correct IP Address.
The factory default
User name
is
admin
and the default
Password
is blank (empty).
It is recommended that you
change the admin password for security purposes.
Please
refer to
Tools>Admin
to change the admin password.
Clicking
Apply
will save changes made to the page
Apply
Clicking
Cancel
will clear changes made to the page
Clicking
Help
will bring up helpful information regarding the page
Help
Clicking
Restart
will restart the router.
(Necessary for some changes.)
Cancel
Restart
Page 12 / 145
12
Using the Configuration Menu
Setup Wizard
The welcome screen outlines the
steps to complete the setup
wizard. Click
Next
to continue.
Once you have logged in, the
Home
screen will appear.
Click
Run Wizard
Click
Next
Page 13 / 145
13
Using the Configuration Menu
Setup Wizard > Set Password
Old Password-
This information is masked.
New Password-
Type in the new password for the
admin
account.
Reconfirm-
Type in the new password again to confirm. Click
Next
to
continue with the Setup Wizard.
Click
Next
Page 14 / 145
14
Select
Others
only if you use PPTP in Europe or Big Pond
Cable in Australia.
Using the Configuration Menu
Setup Wizard > Time Zone
Select the appropriate time zone for your location-
Select the proper time zone.
Selections can be made by
clicking on the drop down list.
Click
Next
to continue.
Click
Next
If you are unsure of which setting to select, please contact
your Internet Service Provider.
Setup Wizard > Connection Type (WAN)
Select Your Internet Connection-
You will be prompted to select
the type of internet connection
for your router. Choose the
appropriate selection and click
Next
to continue.
Click
Next
Page 15 / 145
15
Using the Configuration Menu
Setup Wizard > Set Dynamic IP Address
Host Name-
Host name is the section where you input the name of your
ISP. This section is optional and is not required to be filled in.
MAC Address-
Each network adapter has a discrete Media Access Control
(MAC) address. Note that some computer and peripherals may
already include built-in network adapter.
Clone MAC
Address-
By clicking on Clone MAC Address, the DI-804HV will auto-
matically copy the MAC address of the network adapter in your
computer. You can also manually type in the MAC address.
Click
Next
to continue.
If your ISP uses
Dynamic IP Address
, this screen will appear:
(Used mainly for
Cable Internet service.)
Click
Next
19216811.live