Page 16 / 145 Scroll up to view Page 11 - 15
16
Using the Configuration Menu
Setup Wizard > Set Static IP Address
WAN IP Address-
If your ISP requires a Static IP Address, and this option is se-
lected, then this screen appear. Enter the IP address informa-
tion originally provided to you by your ISP. You will need to
complete all the required fields.
WAN Subnet Mask-
The subnet for the DI-804HV is preconfigured to 255.255.255.0.
Configurations can be made in, but not recommended. This
feature is for advanced users.
WAN Gateway-
This information is provided by your ISP.
Primary DNS-
The Primary DNS can be found by contacting the ISP.
Secondary DNS-
The Secondary DNS can be found by contacting the ISP.
If your ISP uses a
Static IP Address
, and this option is selected, then this screen will
appear.
Click
Next
Page 17 / 145
17
Using the Configuration Menu
Setup Wizard > PPPoE
PPPoE Account-
Enter in the username provided to you by your ISP.
If your ISP uses
PPPoE
(Point-to-Point Protocol over Ethernet), and this option is se-
lected, then this screen will appear: (Used mainly for DSL Internet service.)
PPPoE Password-
Enter in the password provided to you by your ISP.
PPPoE Service
Name-
Enter in the name of your service provider. This is an optional
field and is not necessary to be filled in.
Click
Next
Page 18 / 145
18
Using the Configuration Menu
Setup Wizard
Configure this section only if you have an analog dial-up account. Otherwise click
Next
to skip.
Dial-up
Telephone-
Enter the telephone number to connect to your ISP.
Dial-up Account-
This information is provided by your ISP. The Dial-up Account is
also known as username.
Dial-up Password-
Enter in the password to log into your Dial-up account.
Primary DNS-
The Primary DNS can be found by contacting the ISP.
Secondary DNS-
The Secondary DNS can be found by contacting the ISP.
Click
Next
Page 19 / 145
19
Using the Configuration Menu
Setup Wizard
Back-
Click on Back button to go back to previous page.
Restart-
Click on
Restart
button to finalize the settings made.
Exit-
Click on Exit button to end the Setup Wizard without saving
any changes.
Click
Restart
Page 20 / 145
20
Using the Configuration Menu
Home > WAN
Choose WAN Type
WAN
stands for
Wide Area Network
.
In this case WAN represents the mode in which
you connect to the Internet.
If you are uncertain, please ask your ISP which of the
following represents your connection mode to the Internet:
Static IP Address-
Your ISP assigns you a Static IP Address
Dynamic
IP Address-
Obtain an IP address from your ISP automatically (mainly for
Cable users)
PPPoE-
Some ISPs require the use of PPPoE to connect to their
services (mainly for DSL users)
For use in Europe only
Others-
For use in Australia only
PPTP-
Big Pond Cable-
Dial-up Network -
Dial-up users can select this option to connect to their ISP
through an analog dial-up modem if broadband connectivity
is unavailable.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top