Page 66 / 101
Scroll up to view Page 61 - 65
66
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
From the Command Prompt, enter
ipconfig
. It will return your IP Address, subnet
mask, and default gateway.
Type
exit
to close the command prompt.
Make sure you take note of your computer´s Default Gateway IP Address. The Default
Gateway is the IP Address of the D-Link router. By default, it should be
192.168.0.1How can I assign a Static IP Address in Windows 98/Me?
From the desktop, right-click on the
Network Neigborhood
icon (Win ME - My
Network Places) and select
Properties
.
Highlight
TCP/IP
and click the
Properties
button. If you have more than 1 adapter,
then there will be a TCP/IP “Binding” for each adapter. Highlight
TCP/IP > (your
network adapter)
and then click
Properties
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 67 / 101
67
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Click
Specify an IP Address
.
Enter in an IP Address that is on the same subnet as the LAN IP Address on
your router. Example: If the router´s LAN IP Address is
192.168.0.1, make your
IP Address 192.168.0.X where X is between 2-99. Make sure that the number
you choose is not in use on the network.
Click on the
Gateway
tab.
Enter the LAN IP Address of your router here (192.168.0.1).
Click
Add
when finished.
Downloaded from
www.Manualslib.com
manuals search engine
Page 68 / 101
68
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Click on the
DNS Configuration
tab.
Click
Enable DNS
. Type in a
Host
(can be any word). Under DNS server
search order, enter the LAN IP Address of your router (192.168.0.1). Click
Add
.
Click
OK
twice.
When prompted to reboot your computer, click
Yes
. After you reboot, the computer
will now have a static, private IP Address.
Downloaded from
www.Manualslib.com
manuals search engine
Page 69 / 101
69
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I assign a Static IP Address in Windows 2000?
Right-click on
My Network Places
and select
Properties
.
Right-click on the
Local Area Connection
which represents your network card
and select
Properties
.
Highlight
Internet Protocol (TCP/IP)
and click
Properties.
Click
Use the following IP Address
and enter an IP Address that is on the
same subnet as the LAN IP Address on your router. Example: If the router´s
LAN IP Address is
192.168.0.1, make your IP Address 192.168.0.X where X =
2-99. Make sure that the number you choose is not in use on the network.
Set
the Default Gateway
to be the same as the LAN IP Address of your router
(192.168.0.1).
Set
the Primary DNS
to be the same as the LAN IP address of your router
(192.168.0.1).
Downloaded from
www.Manualslib.com
manuals search engine
Page 70 / 101
70
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
The Secondary DNS
is not needed or enter a DNS server from your ISP.
Click
OK
twice. You may be asked if you want to reboot your computer. Click
Yes
.
How can I assign a Static IP Address in Windows XP?
Click on
Start > Control Panel > Network and Internet Connections > Network
connections
.
See the second step for assigning a static IP address in Windows 2000 and
continue from there.
Step 5:
Access the Web management. Open your Web browser and enter the IP
Address of your D-Link device in the address bar. This should open the login page
for the Web management. Follow instructions to login and complete the configuration.
2 How can I setup my router to work with a Cable
modem connection?
Dynamic Cable connection
(IE AT&T-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast).
Note:
Please configure the router with the computer that was last connected directly
to the cable modem.
Step 1:
Log into the web based configuration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is
admin
(all lowercase) and
the password is
blank
(nothing).
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live