1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DI-724U
    5. /
  5. 13
Page 61 / 101 Scroll up to view Page 56 - 60
61
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Frequently Asked Questions
1
Why can’t I access the Web-based configuration?
When entering the IP Address of the DI-724U
(192.168.0.1), you are not connecting
to the Internet or have to be connected to the Internet. The device has the utility built-
in to a ROM chip in the device itself. Your computer must be on the same IP subnet to
connect to the web-based utility.
To resolve difficulties accessing a
Web utility, please follow the steps below.
Step 1:
Verify physical connectivity by checking for solid link lights on the device. If you
do not get a solid link light, try using a different cable or connect to a different port on
the device if possible. If the computer is turned off, the link light may not be on.
What type of cable should I be using?
The following connections require a Crossover Cable:
Computer to Computer
Computer to Uplink Port
Computer to Access Point
Computer to Print Server
Computer/XBOX/PS2 to DWL-810
Computer/XBOX/PS2 to DWL-900AP+
Uplink Port to Uplink Port (hub/switch)
Normal Port to Normal Port (hub/switch)
The following connections require a Straight-through Cable:
Computer to Residential Gateway/Router
Computer to Normal Port (hub/switch)
Access Point to Normal Port (hub/switch)
Print Server to Normal Port (hub/switch)
Uplink Port to Normal Port (hub/switch)
Rule of Thumb:
”If there is a link light, the cable is right.”
Downloaded from
www.Manualslib.com
manuals search engine
Page 62 / 101
62
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
What´s the difference between a crossover cable and a straight-through cable?
The wiring in crossover and straight-through cables are different. The two types of cable
have different purposes for different LAN configurations. EIA/TIA 568A/568B define
the wiring standards and allow for two different wiring color codes as illustrated in the
following diagram.
*The wires with colored backgrounds may have white stripes and may be denoted that
way in diagrams found elsewhere.
How to tell straight-through cable from a crossover cable:
The main way to tell the difference between the two cable types is to compare the wiring
order on the ends of the cable. If the wiring is the same on both sides, it is straight-through
cable. If one side has opposite wiring, it is a crossover cable.
All you need to remember to properly configure the cables is the pinout order of the
two cable ends and the following rules:
A straight-through cable has identical ends
.
A crossover cable has different
ends.
It makes no functional difference which standard you follow for straight-through cable
ends, as long as both ends are the same. You can start a crossover cable with either
standard as long as the other end is the other standard. It makes no functional difference
which end is which. The order in which you pin the cable is important. Using a pattern
other than what is specified in the above diagram could cause connection problems.
When to use a crossover cable and when to use a straight-through cable:
Computer to Computer – Crossover
Computer to an normal port on a Hub/Switch – Straight-through
Computer to an uplink port on a Hub/Switch - Crossover
Hub/Switch uplink port to another Hub/Switch uplink port – Crossover
Hub/Switch uplink port to another Hub/Switch normal port - Straight-through
Downloaded from
www.Manualslib.com
manuals search engine
Page 63 / 101
63
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 2:
Disable any Internet security software running on the computer. Software
firewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block
access to the configuration pages. Check the help files included with your firewall
software for more information on disabling or configuring it.
Step 3:
Configure your Internet settings.
Go to
Start>Settings>Control Panel
. Double click the
Internet Options
Icon.
From the
Security
tab, click the button to restore the settings to their defaults.
Click to the
Connection
tab and set the dial-up option to
Never Dial a
Connection
. Click the
LAN Settings
button.
Downloaded from
www.Manualslib.com
manuals search engine
Page 64 / 101
64
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Nothing should be checked. Click
OK
.
Go to the
Advanced
tab and click the button to restore these settings to their
defaults.
Click
OK
. Go to the desktop and close any open windows.
Step 4:
Check your IP Address. Your computer must have an IP Address in the same
range of the device you are attempting to configure. Most D-Link devices use the
192.168.0.X range.
How can I find my IP Address in Windows 95, 98, or ME?
Click on
Start
, then click on
Run
.
The Run Dialogue Box will appear. Type
winipcfg
in the window as shown then click
OK
.
Downloaded from
www.Manualslib.com
manuals search engine
Page 65 / 101
65
DI-724U User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
The
IP Configuration
window will appear, displaying your
Ethernet Adapter
Information
.
Select your adapter from the drop down menu.
If you do not see your adapter in the drop down menu, your adapter is not properly
installed.
After selecting your adapter, it will display your IP Address, subnet mask, and
default gateway.
Click
OK
to close the IP Configuration window.
How can I find my IP Address in Windows 2000/XP?
Click on
Start
and select
Run
.
Type
cmd
then click
OK
.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top