Page 46 / 101
Scroll up to view Page 41 - 45
46
DI-724U User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Device Info
This page displays the current information for the DI-724U. It will display the LAN, WAN
and Wireless LAN. If your WAN connection is set up for a
Dynamic IP address
then a
Release
button and a
Renew
button will be displayed. Use
Release
to disconnect from
your ISP and use
Renew
to connect to your ISP.
If your WAN connection is set up for
PPPoE
, a Connect button and a
Disconnect
button will be displayed. Use
Disconnect
to drop the PPPoE connection and use
Connect
to establish the PPPoE connection.
Status > Device Information
Status
The Advanced tab provides the following options: Device Information, Log, Statististics,
Wireless, and Print Server.
Downloaded from
www.Manualslib.com
manuals search engine
Page 47 / 101
47
DI-724U User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
MAC Address
:
The Ethernet ID of the wireless client.
IP Address
:
The LAN-side IP address of the client.
Subnet Mask
:
LAN/Private Subnet Mask of the DI-724U
DHCP Server
: Displays the DHCP server
Enabled
or
Disabled
MAC Address
:
Displays the MAC address
Connection
:
WAN Connection Status
Subnet Mask:
WAN/Public Subnet Mask
Default Gateway:
WAN/Public Gateway IP Address
Wireless Radio:
Displays Wireless status as being off or on.
Network Name (SSID):
Displays the current SSID
Channel:
Displays the current channel
WAN:
LAN:
Wireless LAN:
This window will show the DI-724U’s working status:
Downloaded from
www.Manualslib.com
manuals search engine
Page 48 / 101
48
DI-724U User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the
log files under Log Settings.
Log
Status > Log
What to Veiw:
Select the kinds of events that you want to view.
•
Firewall and Security
•
System
•
Router Status
View Levels:
Select the level of events that you want to view.
•
Critical
•
Warning
•
Informational
The Broadband Router keeps a running log of events and activities occurring on the
Router. If the device is rebooted, the logs are automatically cleared. You may save the
log files under Log Settings.
All of your Internet and Network connection details are displayed
on the Device Information
page. This is primarily a recap of all the WAN, LAN, Wireless, and DHCP options that are
set from the Home tab, The firmware version is also displayed here.
Downloaded from
www.Manualslib.com
manuals search engine
Page 49 / 101
49
DI-724U User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Stats
The screen above displays the Traffic Statistics. Here you can view the amount of packets
that pass through the DI-724U on both the WAN and the LAN ports. The traffic counter
will reset if the device is rebooted.
Status > Statistics
Refresh:
The number of packets received by the router.
Transmit:
The number of packets sent from the router.
Downloaded from
www.Manualslib.com
manuals search engine
Page 50 / 101
50
DI-724U User’s Manual
D-Link Systems, Inc.
Troubleshooting
Wireless
Status > Wireless
The wireless section allows you to view information about the wireless clients that are
connected to your wireless router.
MAC Address:
The Ethernet ID (MAC address) of the wireless client.
IP Address:
The LAN-side IP address of the client.
Mode:
The transmission standard being used by the client. Values are
11b, or 11g for 802.11b, or 802.11g respectively.
Rate:
The actual transmission rate of the client in megabits per
second.
Signal:
This is a relative measure of signal quality. The value is expressed
as a percentage of theoretical best quality. Signal quality can be
reduced by distance, by interference from other radio-frequency
sources (such as cordless telephones or neighboring wireless
networks), and by obstacles between the router and the wireless
device.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live