Page 26 / 109
Scroll up to view Page 21 - 25
26
Account:
Enter in the username for the BigPond account.
Password:
Enter the password for the BigPond account.
Login Server:
(Optional) Enter the Login Server name if required.
Auto-reconnect:
If enabled, the device will automatically connect to your ISP after your unit is re-
started or when the connection is dropped.
Dynamic IP Address for BigPond is a WAN connection used in Australia.
Using the Configuration Menu (continued)
Home > WAN > BigPond Cable
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 109
27
Using the Configuration Menu (continued)
Home > LAN
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DI-704UP. These settings may be
referred to as Private settings. You may change the LAN IP address if needed. The
LAN IP address is private to your internal network and cannot be seen on the Internet.
IP Address:
The IP address of the LAN interface. The default IP address is
192.168.0.1.
Subnet Mask:
The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0.
Local Domain Name:
This field is optional. Enter in the your local domain name.
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 109
28
DHCP stands for Dynamic Host Control Protocol. The DI-704UP has a built-in DHCP
server. The DHCP Server will automatically assign an IP address to the computers on
the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
DI-704UP. The DHCP Server will automatically allocate an unused IP address from the
IP address pool to the requesting computer. You must specify the starting and ending
address of the IP address pool.
Using the Configuration Menu (continued)
Home > DHCP
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 109
29
Using the Configuration Menu (continued)
Home > DHCP
Static DHCP allows computers on the LAN to receive the same DHCP IP address
everytime it boots up. You can bind a specific IP address to a specific computer based
on the computer’s MAC address.
Starting IP address:
The starting IP address for the DHCP server’s IP assignment.
Ending IP address:
The ending IP address for the DHCP server’s IP assignment.
Lease Time:
The length of time for the IP lease.
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 109
30
Using the Configuration Menu (continued)
Advanced > Virtual Server
The DI-704UP can be configured as a virtual server so that remote users accessing Web
or FTP services via the public IP address can be automatically redirected to local servers
in the LAN (Local Area Network). The DI-704UP firewall feature filters out unrecognized
packets to protect your LAN network so all computers networked with the DI-704UP are
invisible to the outside world. If public access is desired, you can make some of the LAN
computers accessible from the Internet by enabling
Virtual Server.
Depending on the
requested service, the DI-704UP redirects the external service request to the appropriate
server within the LAN network.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live