D-Link DI-704UP Router Manual PDF (Setup & Configuration Guide)

Page 21 / 109 Scroll up to view Page 16 - 20

21

IP Address:

Public IP address provided by your ISP.

Subnet Mask:

Subnet mask provided by your ISP.

ISP Gateway Address:

Public IP address of your ISP that you are connecting to.

Primary/Secondary DNS Address:

Enter a DNS Address if you do not wish to use the one provided by your ISP.

MTU:

Enter an MTU value only if required by your ISP. Otherwise, leave it at the default

setting of 1500.

Using the Configuration Menu (continued)

Home > WAN > Static IP Address

Choose Static IP Address if all WAN IP information is provided to you by your ISP. You

will need to enter in the IP Address, subnet mask, gateway address, and DNS address(es)

provided to you by your ISP. Each IP address entered in the fields must be in the appropriate

IP form, which are four IP octets separated by a dot (x.x.x.x). The Router will not accept

the IP Address if it is not in this format.

Downloaded from

www.Manualslib.com

manuals search engine

Page 22 / 109

22

Using the Configuration Menu (continued)

Home > WAN > PPPoE

Please be sure to remove any Client Software program on your

computer before you start your configuration of the DI-704UP

Router. Choose PPPoE (Point to Point Protocol over Ethernet)

if your ISP uses PPPoE connection. Your ISP will provide you

with a username and password. This option is typically used for

DSL services. Select Dynamic PPPoE to obtain an IP address automatically

for your PPPoE connection. Select Static PPPoE to use a static IP address

for your PPPoE connection.

Downloaded from

www.Manualslib.com

manuals search engine

Page 23 / 109

23

Using the Configuration Menu (continued)

Home > WAN > PPPoE (continued)

Retype Password:

Re-enter PPPoE password.

Service Name:

Enter the service name provided by your ISP. (optional)

IP Address:

This option is only available for Static PPPoE. Enter in the static IP address for the

PPPoE connection.

Primary DNS Address:

Primary DNS IP provided by your ISP.

Secondary DNS Address:

Optional.

Maximum Idle time:

The amount of time of inactivity before disconnecting your PPPoE session. Enter a

Maximum Idle Time (in minutes) to define a maximum period of time for which the

Internet connection is maintained during inactivity. If the connection is inactive for longer

than the defined Maximum Idle Time, then the connection will be dropped. Either set

this to zero or enable Auto-reconnect to disable this feature.

MTU:

MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need

to change the MTU settings in order to work correctly with your ISP.

Dynamic PPPoE:

PPPoE connection where you will receive an IP address automatically from your ISP.

Static PPPoE:

PPPoE connection where you have an assigned (static) IP address.

User Name:

Your PPPoE username provided by your ISP.

Password:

Your PPPoE password provided by your ISP.

Auto-reconnect:

If enabled, the Broadband Router will automatically connect to your ISP after your system

is restarted or if the connection is dropped.

Downloaded from

www.Manualslib.com

manuals search engine

Page 24 / 109

24

Dynamic IP Address for PPTP is a WAN connection used in Europe.

Using the Configuration Menu (continued)

Home > WAN > PPTP

My IP Address:

Enter in the IP address for the PPTP connection.

My Subnet Mask:

Enter the subnet mask information.

Server IP:

Enter the Server IP address. By default, its set to 192.168.0.1

Downloaded from

www.Manualslib.com

manuals search engine

Page 25 / 109

25

PPTP Account:

Enter in the username for the PPTP account.

Maximum Idle Time:

The amount of time of inactivity before disconnecting your PPTP session. Enter a

Maximum Idle Time (in minutes) to define a maximum period of time for which the

Internet connection is maintained during inactivity. If the connection is inactive for longer

than the defined Maximum Idle Time, then the connection will be dropped. Either set

this to zero or enable Auto-reconnect to disable this feature.

Auto-reconnect:

If enabled, the device will automatically connect to your ISP after your unit is restarted

or when the connection is dropped.

PPTP Password:

Enter the password for the PPTP account. Retype in Password to confirm.

Connection ID:

(Optional)

Enter the Connection ID if required

.

Using the Configuration Menu (continued)

Home > WAN > PPTP (continued)

Downloaded from

www.Manualslib.com

manuals search engine

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share