Page 11 / 109
Scroll up to view Page 6 - 10
11
Note:
Please see the Manual included with your modem for an explanation of
the modem’s LEDs.
Network Setup
Turn everything off.
A.
Power OFF your Cable or DSL modem. If your modem does
not have an on/off switch, disconnect the power cable.
B.
Turn OFF your computer.
C.
Do
NOT
connect the power adapter to your D-Link router.
Connect the D-Link Router Cables.
A.
Connect the Ethernet (or networking) cable from the Cable or
DSL modem to the WAN port of the router.
B.
Use the D-Link supplied Ethernet cable to connect the Ethernet
port (Network Card) of your computer to one of the LAN ports of
the router. The complete setup should look like the image shown
above.
Power up the devices in sequence.
A.
Power up the Cable or DSL modem.
Wait
until the modem has
made the connection to your Internet Service Provider’s (ISP’s)
network.
B.
Power up the D-Link router by connecting the D-Link provided
power adapter to the router and to an available power outlet.
C.
Turn on your computer.
D.
Now, refer to either the
Quick Installation Guide
or continue
to follow this manual to complete the installation process.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 109
12
Using the Setup Wizard
The logon pop-up screen will appear.
Once you have logged in, the
Home
screen will appear.
Click
Run Wizard
Open your Web browser
and
type
into the
URL address box. Then press the
Enter
or
Return
key.
Type
“admin”
for the username and
leave the password field blank.
Click
OK
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 109
13
You will see the following screens.
Using the Setup Wizard (continued)
Set up your new password
.
You have the option to
establish a password.
Click
Next
Click
Next
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 109
14
Select your Internet
Connection.
You will be
prompted to select the
type of Internet connection
for your router.
Using the Setup Wizard (continued)
Set up your Time Zone
.
You
have the option to the set
standard time for your router.
To change the default
selection, select the drop
down arrow and choose the
correct time zone.
Click
Next
If you are unsure of which setting to select,
please contact your Internet Service Provider.
Click
Next
Select
Others
only if you use PPTP in Europe or
BigPond Cable in Australia.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 109
15
Using the Setup Wizard (continued)
If you selected
Dynamic IP
Address
, this screen will
appear:
(Used mainly for
Cable Internet service.)
If your ISP requires a
Static
IP Address
, and this option
is selected, then this
screen will appear:
Enter the IP Address informa-
tion originally provided to you
by your ISP. You will need to
complete all the listed fields.
What is a MAC address?
Each
network adapter has a discrete
Media Access Control (MAC)
address. Note that some computers
and peripherals may already
include built-in network adapters.
Click
Next
Click
the
“
Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
Click
Next
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live