Page 36 / 74
Scroll up to view Page 31 - 35
36
Using the Configuration Menu
Tools> Admin
Password
Remote
Management
To change the admin and user passwords, enter in the old
password, and enter the new password twice to confirm.
There are two accounts that can access the Broadband Router’s Web-Management
interface. They are
admin
and
user
.
Admin
has read/write access while
user
has read-
only access.
User
can only view the settings but cannot make any changes. It is rec-
ommended that you change the admin password from the default setting. The default
password is blank (no password).
Remote Management allows the device to be configured
through the WAN (Wide Area Network) port from the Internet
using a web browser. A username and password is still required
to access the browser-based management interface.
IP Address
Internet IP Address of the computer that has access to the
DI-614+.
If the IP Address is set to 0.0.0.0, this allows all Internet
IP addresses to access the DI-614+.
Port
The port number used to access the DI-614+.
the DI-614+ and 80 is the port used for the Web Management
interface.
Page 37 / 74
37
Using the Configuration Menu
Tools> Time
Set the time here by entering it manually or by using NTP (Network Time Protocol.) NTP
is a standard protocol on the Internet that sychronizes the time settings accurately for
all the computers on your network.
Default NTP Server
(Optional.) If you are enabling NTP to synchronize the time
settings on your network using an NTP server, please enter
the link to the default server.
Time Zone
Select your time zone from the pull-down menu.
Set Device Date and
Time
If you are entering the time manually, select the correct Year,
Month, Day, Hour, Minute, and Second.
Daylight Saving
Select to enable or disable Daylight Saving. If you choose to
enable this, enter the start and end date and the system time
will automatically adjust on those dates
Page 38 / 74
38
Using the Configuration Menu
Tools > System
Click
Backup Setting
to save the current settings to the local
Hard Drive.
Click
Browse
to find the settings file, then click
Load.
Save Settings to
Local Hard Drive
Load Settings from
Local Hard Drive
Restore to Factory
Default Settings
Click
Reset to Default
to restore the factory default settings.
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file created by the DI-614+ can be uploaded to the unit.
To reload a system settings file, click on
Browse
to search the local hard drive for
the
file to be used. The device can also be reset back to factory default settings by clicking
on the
Reset to Default
button. Use the restore feature only if necessary. This will erase
previously saved settings for the unit.
Make sure to save your system settings to the
hard drive before doing a factory restore.
Page 39 / 74
39
Using the Configuration Menu
Tools > Firmware
Browse
After you have downloaded the new firmware, click
Browse
in
this window to locate the firmware update on your hard drive.
Click
Apply
to complete the firmware upgrade.
You can upgrade the firmware by using this tool. First, check the D-Link support site for
firmware updates at
. Make sure that the firmware you want to
use is saved on the local hard drive of your computer. Click on
Browse
to search the local
hard drive for the firmware that you downloaded from the D-Link website to be used for
the update. Upgrading the firmware will not change any of your system settings but it is
recommended that you save your system settings before doing a firmware upgrade.
Note: Do not power off the unit when it is being upgraded. When the
upgrade is complete, the unit will automatically restart.
Page 40 / 74
40
Using the Configuration Menu
Tools >DDNS
DDNS
When an IP address is automatically assigned by a DHCP
server, DDNS automatically updates the DNS server. Select
Disabled
or
Enabled
.
Server Address
Username
Host Name
Password
DDNS (Dynamic Domain Name System) keeps dynamic IP addresses (e.g., IP
addresses assigned by a DHCP capable router or server) linked to a domain name.
Users who have a Dynamic DNS account may use this feature on the DI-614+.
Enter the Host name.
Select from the pull-down menu.
Enter the username.
Enter the password.
19216811.live