D-Link DI-614+v2 Router Manual PDF (Setup & Configuration Guide)

Page 21 / 74 Scroll up to view Page 16 - 20

21

Using the Conﬁguration Menu

Home > WAN > L2TP

L2TP Password

Enter the PPTP password.

L2TP Account

Enter the PPTP account name.

Subnet Mask

Enter the Subnet Mask.

Maximum

Idle Time

Enter a maximum idle time during which Internet connection

is maintained during inactivity. To disable this feature, enable

Auto-reconnect.

IP Address

Enter the IP Address.

Server IP

Enter the Server IP Address.

Layer 2 Tunneling Protocol (L2TP) is a WAN connection.

Auto-reconnect

If enabled, the Broadband Router will automatically connect

to your ISP after your system is restarted or if the connection

is dropped.

MTU

Maximum Transmission Unit

; default is 1400; you may need to

change the MTU to conform to your ISP.

Page 22 / 74

22

Using the Conﬁguration Menu

Home > WAN > BigPond Cable

User Name

Enter in the username for the BigPond account.

Password

Enter the password for the BigPond account.

Login Server IP

(Optional) Enter the Login Server name if required.

Dynamic IP Address for BigPond is a WAN connection used in Australia.

Auth Server

Select the auth server for the BigPond account.

MAC Address

The default MAC Address is set to the WAN’s physical interface

MAC address on the Router.

Clone

MAC Address

This feature will copy the MAC address of the Ethernet card, and

replace the WAN MAC address of the Router with this Ethernet

card MAC address. It is not recommended that you change the

default MAC address unless required by your ISP.

Page 23 / 74

23

Home > LAN

Using the Conﬁguration Menu

Local Domain Name

(Optional) The name of your local domain.

Subnet Mask

The subnet mask of the LAN interface.

The default subnet mask is

255.255.255.0

.

IP Address

The IP address of the LAN interface.

The default IP address is:

192.168.0.1

.

LAN

is short for Local Area Network. This is considered your internal network. These are

the IP settings of the LAN interface for the DI-614+.

These settings may be referred to

as Private settings. You may change the LAN IP address if needed. The LAN IP address

is private to your internal network and cannot be seen on the Internet.

DNS Relay

You may choose to enable or disable DNS Relay. If disabled,

the DNS address received on the WAN port will pass through

to the LAN clients.

Page 24 / 74

24

Home > DHCP

Using the Conﬁguration Menu

DHCP stands for Dynamic Host

Control Protocol. The DI-614+

has a built-in DHCP server. The

DHCP Server will automatically

assign an IP address to the

computers on the LAN/private

network. Be sure to set your

computers to be DHCP clients

by setting their TCP/IP settings

to “Obtain an IP Address

Automatically.” When you turn

your computers on, they will

automatically load the proper

TCP/IP settings provided by

the DI-614+. The DHCP Server

will automatically allocate an

unused IP address from the IP

address pool to the requesting

computer. You must specify the

starting and ending address of

the IP address pool.

Lease Time

The length of time for the DHCP lease.

DHCP Clients List

Lists the DHCP clients connected to the DI-614+. Click

Refresh

to update the list. The table will show the Host Name, IP Address,

and MAC Address of the DHCP client computer.

Enable or disable the DHCP service.

DHCP Server

Ending IP Address

The ending IP address for the DHCP server’s IP assignment.

Starting IP Address

The starting IP address for the DHCP server’s IP assignment.

Static DHCP

Used to allow the DHCP server to assign the same IP adress to

a speciﬁc MAC address. Enter the name, IP address, and MAC

address into the ﬁelds. Select which DHCP client to clone.

Name

The name to be used to reference the speciﬁc static DHCP

client.

MAC Address

The MAC address of the static DHCP client.

DHCP Client

Drop down list of all currently connected DHCP clients.

Page 25 / 74

25

Advanced > Virtual Server

Using the Conﬁguration Menu

The DI-614+ can be conﬁgured as a virtual server so that remote users accessing

Web or FTP services via the public IP address can be automatically redirected to local

servers in the LAN (Local Area Network).

The DI-614+ ﬁrewall feature ﬁlters out unrecognized packets to protect your LAN network

so all computers networked with the DI-614+ are invisible to the outside world. If you

wish, you can make some of the LAN computers accessible from the Internet by enabling

Virtual Server.

Depending on the requested service, the DI-614+ redirects the external

service request to the appropriate server within the LAN network.

Private/ Public Ports

Enter in the private and public port or ports to be used.

A range

of ports can be speciﬁed with a hyphen.

(e.g., 20-21)

Private IP

The IP address of the internal computer that will be using the

virtual service.

Enable

Select to activate the policy.

Name

You can name the Virtual Server.

Schedule

Select

Always

, or choose

From

and enter the time period during

which the virtual service will be available.

Protocol Type

Select the protocol the Virtual Server will use.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share