Page 16 / 74 Scroll up to view Page 11 - 15
16
Using the Configuration Menu
Home > WAN > Dynamic IP Address
Most Cable modem users will select this option to obtain an IP
Address
automatically
from their ISP (Internet Service Provider).
Host Name
This is optional, but may be required by some ISPs. The host
name is the device name of the Router.
MAC Address
The default MAC Address is set to the WAN’s physical interface
MAC address on the Router.
Clone
MAC Address
This feature will copy the MAC address of the Ethernet card, and
replace the WAN MAC address of the Router with this Ethernet
card MAC address. It is not recommended that you change the
default MAC address unless required by your ISP.
Input the primary DNS address provided by your ISP
(Optional) Input the Secondary DNS address provided by your
ISP.
MTU
Maximum Transmission Unit
; default is 1500; you may need to
change the MTU to conform to your ISP.
Primary DNS
Address
Secondary DNS
Address
Page 17 / 74
17
Using the Configuration Menu
Home > WAN > Static IP Address
Secondary DNS
Address
(Optional) Input the Secondary DNS address provided by
your ISP.
Primary DNS
Address
Input the primary DNS address provided by your ISP.
ISP Gateway
Input the Gateway address provided by your ISP.
Subnet Mask
Input the Subnet Mask provided by your ISP.
IP Address
Input the IP Address provided by your ISP.
MTU
Maximum Transmission Unit
; default is 1500; you may need to
change the MTU to conform to your ISP.
Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will
need to enter in the IP address, subnet mask, gateway address, and DNS address(es)
provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate
IP form, which are four IP octets separated by a dot (x.x.x.x). The Router
will not accept the IP address if it is not in this format.
MAC Address
The default MAC Address is set to the WAN’s physical interface
MAC address on the Router.
Clone
MAC Address
This feature will copy the MAC address of the Ethernet card, and
replace the WAN MAC address of the Router with this Ethernet
card MAC address. It is not recommended that you change the
default MAC address unless required by your ISP.
Page 18 / 74
18
Using the Configuration Menu
Home > WAN > PPPoE
Most DSL users will select this option to obtain an IP address automatically from their
ISP through the use of PPPoE.
IP Address
(Optional) Enter in the IP Address if you are assigned a static
PPPoE address.
Service Name
(Optional) Check with your ISP for more information if they require
the use of service name.
Password
Your PPPoE username provided by your ISP.
User Name
Your PPPoE password is provided by your ISP.
MAC Address
The default MAC Address is set to the WAN’s physical interface
MAC address on the Router.
Clone
MAC Address
This feature will copy the MAC address of the Ethernet card, and
replace the WAN MAC address of the Router with this Ethernet
card MAC address. It is not recommended that you change the
default MAC address unless required by your ISP.
Page 19 / 74
19
MTU
Maximum Transmission Unit
; default is 1492; you may need to
change the MTU to conform to your ISP.
Maximum
Idle Time
Enter a maximum idle time during which Internet connection
is maintained during inactivity.
To disable this feature, enable
Auto-reconnect
.
(Optional) Input the secondary DNS address.
You will get the DNS IP automatically from your ISP but you
may enter a specific DNS address that you want to use instead.
Auto-reconnect
If enabled, the Broadband Router will automatically connect to
your ISP after your system is restarted or if the connection is
dropped.
Primary DNS
Address
Using the Configuration Menu
Home > WAN > PPPoE (Continued)
Secondary DNS
Address
Page 20 / 74
20
Using the Configuration Menu
Home > WAN > PPTP
PPTP Password
Enter the PPTP password.
PPTP Account
Enter the PPTP account name.
Subnet Mask
Enter the Subnet Mask.
Maximum
Idle Time
Enter a maximum idle time during which Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
IP Address
Enter the IP Address.
Server IP
Enter the Server IP Address.
Point-to-Point Tunneling Protocol (PPTP) is a WAN connection used in Europe.
Auto-reconnect
If enabled, the Broadband Router will automatically connect
to your ISP after your system is restarted or if the connection
is dropped.
MTU
Maximum Transmission Unit
; default is 1400; you may need to
change the MTU to conform to your ISP.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top