19216811.live51
Troubleshooting
2. The wireless client cannot access the Internet in the Infrastructure mode.
Make sure the wireless client is associated and joined with the
correct router. To check this connection:
Right-click
on the
Local Area
Connection icon
in the taskbar> select
View Available Wireless Networks
.
The
Connect to Wireless Network
screen will appear.
Please make
sure you have selected the correct available network, as shown in
the illustrations below.
Check that the
IP Address
assigned to the wireless adapter is within the
same
IP Address range
as the gateway.
(Since the DI-614+ has an IP
Address of 192.168.0.1, wireless adapters must have an IP Address in
the same range, e.g., 192.168.0.x. Each device must have a unique IP
Address; no two devices may have the same IP Address. The subnet
mask must be the same for all the computers on the network.)
To
check the
IP Address
assigned to the wireless adapter,
double-click
on
the
Local Area Connection icon
in the taskbar > select the
Support tab
and the
IP Address
will be displayed. (Please refer to
Checking the IP
Address
in the
Networking Basics
section of this manual.)
If it is necessary to assign a
Static IP Address
to the wireless adapter,
please refer to the appropriate section in
Networking Basics
.
If you are
entering a
DNS Server address
you must also enter the
Default Gateway
Address.
(Remember that if you have a DHCP-capable router, you
will not need to assign a Static IP Address. See
Networking Basics:
Assigning a Static IP Address.
)
Default